RFID ultra-high frequency forklift retrofit Bluetooth reader UR6259RegardingIntelligent warehousingRFID forklift transformation and development,RFID forklift modificationThe Bluetooth reader is deeply developed based on the IMPINJ R2000 chip, and is equipped with a Bluetooth interface for convenient data transmission to the forklift's tablet without the need for wiring,RFID forklift modificationBluetooth reader/writerAdopting waterproof aviation connectors, it can meet the use under harsh working conditions,RFID forklift modificationBluetooth reader/writerWidely used in various wireless radio frequency identification (RFID) systems such as production management, logistics sorting, field work vehicles, and field data collection.

RFID ultra-high frequency forklift retrofit Bluetooth reader features:

Deep development based on Impinj R2000 chip;
RFID forklift retrofit Bluetooth reader fully supports compliance、Electronic tags;

Optional supportNational standard GB29768 protocol，Military Standard GJB7377.1A-2011-2018 Agreement；
Optional supportPassive temperature measurementCold chain temperature measurement;

Operating frequency: 860~868MHz/902~928MHz (can be adjusted according to the requirements of different countries or regions)
Operate in broad-spectrum frequency hopping (FHSS) or fixed frequency transmission mode;
RFID forklift modification Bluetooth reader reading distance>10m (external 6dBiL antenna, tag E41)
Support response mode andAutomatic real-time inquiry mode
Output power up to 30dBm (adjustable);
RFID forklift modificationBluetooth reader/writerEquipped with 4 external TNC antenna interfaces, supporting automatic micro tuning and antenna failure detection, each antenna can be individually configured with power;
RFID forklift modificationBluetooth reader/writerAdopting a low-power design, powered by a single+5-24V power supply, and the power interface adopts a waterproof interface;
Supports RS232 and Bluetooth interfaces;

RFID ultra-high frequency forklift retrofit Bluetooth reader performance parameters

Model: UR6259
Size: 180mmx145mmx28mm
Weight: 700g

RFID ultra-high frequency forklift retrofit Bluetooth reader mechanical performance

Power supply voltage: DC9V, wide voltage range of 5-24V
RFID forklift modificationBluetooth reader/writerWorking current: 0.5A, maximum 1.2A
Working humidity:<95%='' @='' 25='' ° C=''>
Working temperature: -20 ° C -+55 ° C
Storage temperature: -20 ° C -+85 ° C

RFID ultra-high frequency forklift retrofit Bluetooth reader interface parameters

DB9 interface parameters: 2: TXD 3: RXD 5: Ground remaining reserved
Wireless interface: Bluetooth adaptive module

RFID ultra-high frequency forklift retrofit Bluetooth reader development parameters

Instruction set: Provides C language instruction set
Demo: Provide language demonstration software and source code such as C #, Delphi, JAVA, etc
Dll library: provides language libraries such as C #, VB, JAVA, and library descriptions
Firmware Upgrade: Supports personalized firmware upgrades

RFID ultra-high frequency forklift retrofit Bluetooth reader RF parameters

Interface Protocol: EPCglobal UHF Class 1 Gen 2/ISO 18000-6C ISO 18000-6B
RFID forklift modificationBluetooth reader/writerOperating frequency: 860~868MHz/902~928MHz (can be adjusted according to the requirements of different countries or regions)
Output power: 0-30 dBm
Output power accuracy:+/-1dB
Receiving sensitivity:<-85=''>
Antenna connection protection: supports automatic micro tuning of antennas and antenna failure detection
Tag signal detection: supports signal RSSI value detection

RFID ultra-high frequency forklift modification with Bluetooth reader to read parameters

Tag cache: Tag cache capacity: 600 sheets @ maximum 128bitsEPC or 180 sheets @ maximum 496bitsEPC
RFID forklift modificationBluetooth reader/writerPeak label inventory: Peak label query speed>800 sheets
Reading distance: 0-45 meters depending on different parameters and performance of tags and antennas

RFID ultra-high frequency forklift transformation Bluetooth reader related solutions and products:

RFID forklift modificationBluetooth reader/writerUR6258 is a high-performance UHF ultra-high frequency device developed based on IMPINJ,Optional supportNational standard GB29768 protocol，Military Standard GJB7377.1A-2011-2018 AgreementOptional supportPassive temperature measurementCold chain temperature measurement;Widely used in various wireless radio frequency identification (RFID) systems such as warehouse entry and exit, weighing management, logistics sorting, access control systems, anti-counterfeiting systems, and production process control.

The RFID ultra-high frequency industrial application antenna UA1313 is a high-performance UHF. It can be widely used in various wireless radio frequency identification (RFID) systems such as workstation production lines, mold positioning, intelligent filing cabinets, clothing logistics, mini libraries, drifting bookshelves, archive management, drug supervision, wine management, access control, anti-counterfeiting systems, and production process control.

The RFID Ultra High Frequency (UHF) Android MT50A is equipped with an 8-core 2.0GHz high-performance processor, combined with the Android (periodic upgrade) system. It is equipped with 2GB RAM and 16GB ROM memory, as well as a 5.5-inch IPS high brightness screen. Optional barcode (one-dimensional or two-dimensional), RFID low-frequency (125KHz), high-frequency (13.56MHz), and (902-928MHz) high-performance modules are also available. All six sides can withstand the impact of falling from a height of 1.5 meters to a cement floor, with an IP rating of up to IP65. It can be widely used in various wireless radio frequency identification (RFID) systems such as logistics and express delivery, equipment inspection, medical care, anti-counterfeiting traceability, product quality inspection, water and electricity meter reading, clothing ordering, mobile sales operations, etc.

The ultra-high frequency explosion-proof handheld phone MT6 adopts a 6.0-inch IPS high brightness screen with a resolution of 2160 * 1080. It is based on an 8-core 2.0GHz high-performance processor and combined with the Android (periodically upgraded) system. It is equipped with 4GB RAM and 64GB ROM large memory. The ultra-high frequency is deeply developed by IMPINJ, and the recognition distance can reach 7 meters. It is equipped with 6000mAh+4000mAh lithium batteries, and the ultra long battery life meets various high load applications. It can be widely used in various wireless radio frequency identification (RFID) systems such as management, equipment inspection, book and archive inventory, management, anti-counterfeiting traceability, product quality inspection, aviation ticketing, water and electricity meter reading, animal husbandry management, service ordering, mobile sales operations, etc.

RFID ultra-high frequency long-distance UT9135 has excellent anti metal properties and extraordinary high cost-effectiveness. High strength packaging can be applied in harsh working environments, and the special design enables remote reading capability. Suitable for equipment inspection, building materials management, warehouse management, large outdoor assets, power equipment, and automotive parts management.

The ultra-high frequency anti metal asset management tag UT8957 has excellent anti metal properties, high cost-effectiveness, and high-strength packaging that can be applied in harsh working environments. Its special design enables the tag to have long-distance reading capabilities. combineRFID forklift modificationBluetooth reader/writerSuitable for equipment inspection, management, building materials management, automotive production line management, warehouse management, large outdoor assets, power equipment management, etc.

RFID high-frequency HZHJ is developed for industries that require strict supervision of important items such as reagents, samples, non-metallic products, accessories, material boxes, etc. Adopting the 13.56MHz high-frequency ISO/IEC15693 protocol HR7768, the intelligent shelf accurately locates items to each layer without the need to shield signals. There is no recognition area outside the shelf, and combined with the backend management system, real-time information of items on the shelf can be viewed. Various statistical reports can also be customized according to customer requirements. Combining identity recognition technology can determine the information of personnel who receive and place items.

The RFID intelligent tool cabinet UZ02 is an intelligent tool management cabinet developed by Shanghai Yingxin for high-end manufacturing, energy enterprises, various emergency operation points, various maintenance factories and other industries. It uses an Android 6.0 or above system, combined with a deep developed ultra-high frequency UR6286 and an intelligent lock control system. The high-performance antenna UA1313 developed for the metal environment of the intelligent cabinet and the UT8137 electronic tag developed for tool management enable unmanned intelligent management of various operation tools, measuring instruments, safety helmets, protective clothing, protective gloves and other tools. Control the inventory of tools with tool labels on the ultra-high frequency reader/writer during collection and return through the APP, display the borrowing and returning list as well as the inventory list, and use card swiping, ID card swiping, or QR code swiping to recognize the borrowing and returning personnel for permission management.

RFID Ultra High Frequency Channel Door UDX is a high-performance customizable channel device that can be customized for Android or Windows systems, buzzers and indicator lights, display screens, and surface printing. It operates at a frequency of 902-928MHz and supports UHFEPCGN2 (ISO18000-6C) and ISO18000-6B formats,Optional supportNational standard GB29768 protocol，Military Standard GJB7377.1A-2011-2018 AgreementOptional supportPassive temperature measurementCold chain temperature measurement;Supports multiple user interfaces such as RS232, RS485, and TCPIP networks. It is an ideal choice for unmanned tool warehouse management, open attendance, and sorting line control.