VIP member
RF optoelectronic module
The RF optoelectronic module is used to convert RF signals into optical signals, transmit them through optical fibers, and then convert the optical si
Product details
The RF optoelectronic module is used to convert RF signals into optical signals, transmit them through optical fibers, and then convert the optical signals into RF signals at the receiving end. It has a long distance, high bandwidth, and flat response, and is used in communication and radar systems. In satellite communication, point-to-point antennas can convert RF signals into optical signals through this device, and connect them to control rooms several meters to several kilometers away through optical fibers. Broadcast signals can also be used toRFThe signal is converted into an optical signal and transmitted through optical fibers. The radar system can connect the radar antenna and signal room remotely through this method.RF optoelectronic moduleDepending on the bandwidth, there are8GHz,15GHz,20GHzProducts with different RF bandwidths, and others3GHz, 2.4GHz,1.5GHz
In the low-frequency range, unidirectional and bidirectional transmission systems can be selected as needed.
advantage
1. High bandwidth
2. Anti electromagnetic interference1310nm/1490nm/1550nm
3. Optional different wavelengths of light
4. Anti surge power protection, reliable power environment adaptability
5. Adaptive temperature compensation capability, controlling the stable output of the light source.
6. Compact and small volume.
7. Applicable to * * standards
Application scenarios
1. Pull the radar antenna far away
2. Long distance RF signal transmission
3. Radio signal monitoring
4. GPS、 Navigation signal transmission coverage in Beidou or other formats
5. Electronic Warfareparameter table:
|
ROF001M |
parameter name |
unit |
|
indicator value |
frequency range |
MHz |
|
1 – 200 |
Link gain |
dB |
|
0 |
flatness |
dB |
|
≤ ± 2input1dB |
Compression point |
dBm |
|
≥ 0 |
VSWR |
NA |
|
≤ 2:1 |
*Large input RF signal |
10 |
|
dBmnoise floor(Excluding harmonics |
) |
dBm≤-120（@0Hz |
|
RBW |
） |
phase noise |
|
dBc< -135@1MHzinput |
/ |
50 |
|
output impedance |
Ohm |
power supply method |
|
VDC |
6~12V |
power consumptionW<1( |
|
Single module |
) |
Laser operating wavelengthnm1310/1550 |
|
or |
WDM |
Laser output power |
|
dBm |
0 |
Detector operating wavelength |
|
nm |
1100~1650 |
Fiber optic connector type |
|
NA |
FC/APC |
RF connector type |
|
NA |
|
|
|
SMA |
environmental parameters |
Volume size |
|
mm |
085*60*18 |
Working temperature rangeC-10 to 65( |
|
optional |
|
-40 to |
|
85) |
|
Humidity |
95% relative humidityVibrationPer MIL STD-8108B Method
514 -5Beijing Jinkun Technology Co., LtdROF001MRF optoelectronic moduleCommitted to providing customers with precise, accurate, stable, and reliable optoelectronic products and solutions. Beijing Jinkun Technology Co., Ltd. mainly producesMicrowave fiber optic transmission module, RF fiber optic transmission module, RFfiber optic transceiver，Fiber optic delay line，High speed optical switch，Uniform light spot environment,RF optoelectronic moduleand other products,
Welcome to inquire!www.jonkon.com.cn
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-