VIP member
RF optical module
The RF optical module/RF over Fiber (RF fiber transceiver) in this series is used to convert RF signals into optical signals, transmit them through op
Product details
The RF optical module is used to convert RF signals into optical signals, transmit them through optical fibers, and then convert the optical signals into RF signals at the receiving end. It has a long distance, high bandwidth, and flat response, and is used in communication and radar systems. In satellite communication, point-to-point antennas can convert RF signals into optical signals through this device, and connect them to control rooms several meters to several kilometers away through optical fibers. Broadcast signals can also be used toRFThe signal is converted into an optical signal and transmitted through optical fibers. The radar system can connect the radar antenna and signal room remotely through this method. RF optical modules have different bandwidths8GHz,15GHz,20GHzProducts with different RF bandwidths, and others3GHz, 2.4GHz,1.5GHz
In the low-frequency range, unidirectional and bidirectional transmission systems can be selected as needed.
RF optical module
advantage
1. High bandwidth
2. Anti electromagnetic interference3. Optional different wavelengths of light
1310nm/1490nm/1550nm
4. Anti surge power protection, reliable power environment adaptability
5. Adaptive temperature compensation capability, controlling the stable output of the light source.
6. Compact and small volume.
7. Applicable to * * standards
RF optical module
Application scenarios
1. Pull the radar antenna far away
2. Long distance RF signal transmission
3. Radio signal monitoring
4. Microwave signal transmission coverage
5. Electronic Warfare
6. Radar signal delay
RF optical moduleParameter Table:
|
ROF060M |
Parameter |
unit |
|
Indicator value |
Frequency range |
MHz |
|
2000 – 6000 |
link gain |
dB0 |
|
make an appointment |
Flatness |
dB |
|
≤ ± 3.5input1dB |
Compression point |
dBm |
|
≥ 0 |
VSWR |
NA |
|
≤ 2:1 |
*Large input RF signal |
10 |
|
dBm |
|
figure |
|
<35input/ |
Output Impedance |
50 |
|
Ohm |
Power supply mode |
VDC |
|
6~12V |
power consumption |
W<2 |
|
(Single module) |
Laser output wavelength |
nm1310/1550perhaps |
|
WDM |
Laser output power |
dBm |
|
>0dBm |
Detector operating wavelength |
nm |
|
1100~1650 |
Fiber optic connector type |
NAFC/APC |
|
interface |
RF connector type |
NA |
|
SMA |
size |
mm85*60*18(Excluding connectors |
)Beijing Jinkun Technology Co., Ltd
ROF060M RF optical moduleCommitted to providing customers with precise, accurate, stable, and reliable optoelectronic products and solutions. Beijing Jinkun Technology Co., Ltd. mainly producesMicrowave fiber optic transmission module, RF fiber optic transmission module, RF optical module, RFFiber optic transceiver，fdl，high speed optical switch，Uniform light spot environmentWaiting for products,Welcome to consult!www.jonkon.com.cn，www.jon-kon.com, Contact phone number
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-