VIP member
RF fiber optic module
The RF fiber optic module is used to convert RF signals into optical signals, transmit them through optical fibers, and then convert the optical signa
Product details
Beijing Jinkun Technology Co., Ltd.:RF fiber module: ROF010M, ROF030M, ROF060M, ROF120M, ROF400M
RF fiber optic moduleUsed to convert RF signals into optical signals, transmit them through optical fibers, and then convert the optical signals into RF signals at the receiving end. Suitable for applications in communication and radar.In satellite communication, point-to-point antennas can convert RF signals into optical signals through this device, and connect them to control rooms several meters to several kilometers away through optical fibers. Broadcast signals can also convert RF signals into optical signals and transmit them through optical fibers. The radar system can connect the radar antenna and signal room remotely through this method. RF fiber optic moduleAccording to different bandwidths, there are products with different RF bandwidths of 8GHz, 15GHz, and 20GHz, as well as low-frequency products such as 3GHz, 2.4GHz, and 1.5GHz. This model has a 2.4GHz bandwidth.
advantage
1. High bandwidth
2. Anti electromagnetic interference
3. Optional different wavelengths of light1310nm/1490nm/1550nm
4. Anti surge power protection, reliable power environment adaptability
5. Adaptive temperature compensation capability, controlling the stable output of the light source.
6. Compact and small volume
7. Applicable to * * standards.
Application scenarios
1. Pull the radar antenna far away
2. Long distance RF signal transmission
3. Radio signal monitoring
4. GPS、 Navigation signal transmission coverage in Beidou or other formats
5. Electronic Warfare
Parameter Table:ROF001M
|
Parameter |
unit |
Indicator value |
|
Frequency range |
MHz |
1 – 200 |
|
link gain |
dB |
0 |
|
Flatness |
dB |
≤ ± 2 |
|
input1dBCompression point |
dBm |
≥ 0 |
|
VSWR |
NA |
≤ 2:1 |
|
*Large input RF signal |
dBm |
10 |
|
Digital Noise Floor(Excluding harmonics) |
dBm |
≤-120（@0HzRBW |
|
） |
phase noise |
dBc |
|
< -135@1MHzinput/ |
Output Impedance |
50 |
|
Ohm |
Power supply mode |
VDC |
|
6~12V |
power consumption |
W<1(single module |
|
) |
Laser operating wavelength |
nm1310/1550perhaps |
|
WDM |
Laser output power |
dBm |
|
0 |
Detector operating wavelength |
nm |
|
1100~1650 |
Fiber optic connector type |
NA |
|
FC/APC |
RF connector type |
NA |
|
SMA |
|
|
|
Environmental parameters |
Volume size |
mm |
|
85*60*18 |
0Working temperature range |
C-10 to 65(optional |
|
-40 to |
|
85) |
|
Humidity |
|
95% relative humidity |
VibrationPer MIL STD-8108B Method514 -5
|
Parameter Table |
: |
ROF030M |
|
Parameter |
unit |
Indicator value |
|
Frequency range |
MHz |
200– 3000link gain |
|
dB |
make an appointment |
0dB |
|
FlatnessdB≤ ± 3 |
input |
1dB |
|
Compression point |
dBm |
≥ 0 |
|
VSWR |
NA |
10 |
|
≤ 2:1 |
|
*Large input RF signal |
|
dBm |
figure |
<30 |
|
phase noisedBc< -130@1MHz |
input |
50 |
|
/ |
Output Impedance |
Ohm |
|
Power supply mode |
VDC |
6~12Vpower consumptionW |
|
<2( |
single module |
)Laser operating wavelengthnm |
|
1310/1550 |
perhaps |
WDM |
|
Laser output power |
dBm |
0 |
|
Detector operating wavelength |
nm |
1100~1650 |
|
Fiber optic connector type |
NA |
FC/APC |
|
RF connector type |
|
|
|
NA |
SMA |
Environmental parameters |
Volume sizemm85*60*18
|
Parameter Table |
: |
ROF060M |
|
Parameter |
unit |
Indicator value |
|
Frequency range |
MHz |
2000 – 60000 |
|
link gain |
dB |
make an appointment |
|
FlatnessdB≤ ± 3.5 |
input |
1dB |
|
Compression point |
dBm |
≥ 0 |
|
VSWR |
NA |
10 |
|
≤ 2:1 |
|
*Large input RF signal |
|
dBmfigure<35 |
input |
50 |
|
/ |
Output Impedance |
Ohm |
|
Power supply mode |
VDC |
6~12Vpower consumption |
|
W |
<2 |
(Single module)Laser output wavelengthnm |
|
1310/1550 |
perhaps |
WDM |
|
Laser output power |
dBm |
>0dBm |
|
Detector operating wavelength |
nm |
1100~1650Fiber optic connector type |
|
NA |
FC/APC |
interface |
|
RF connector type |
NA |
SMAsizemm |
85*60*18(Excluding connectors)
|
Parameter Table |
: |
ROF120M |
|
Parameters |
unit |
Typical value |
|
Frequency range |
GHz |
0.01 – 12 |
|
Wavelength |
1550nm+/-10nm |
ITU wavelength available |
|
Gain |
dB |
> -18@2GHz ( not include EDFA, EDFA optional) |
|
Input IP3 |
dBm |
26@10GHz |
|
2Input 1dB compressiondBm |
≥+20 |
nd |
|
Harmonic distortion |
dBc-70 typ. |
113 |
|
SFDR |
dBHz |
10 |
|
2/3 |
|
Max input RF power |
|
dBm |
Noise Figure |
<-145dB/Hz |
|
IM3 Distortion |
dBc |
50 |
|
<-90 |
Input/output impedance |
Ohm |
|
Optical connector |
NA |
FC/APC |
RF connectorNASMA
|
Parameter Table |
: |
ROF400M |
|
Parameters |
unit |
Typical value |
|
Frequency range |
GHz |
0.01 – 42 |
|
Wavelength |
1550nm+/-10nm |
ITU wavelength available |
|
Gain |
dB |
> -18@2GHz |
|
Input IP3 |
dBm |
26@10GHz |
|
2Input 3dB compressiondBm |
+20 typical |
nd |
|
Harmonic distortion |
dBc-70 typ. |
113 |
|
SFDR |
dBHz |
2/3 |
|
Max input RF power |
|
dBm |
|
+42dBm |
Noise Figure |
<-145dB/Hz |
|
IM3 Distortion |
dBc |
50 |
<-90Input/output impedance
OhmBeijing Jinkun Technology Co., Ltd.:RF fiber optic moduleCommitted to providing customers with precise, accurate, stable, and reliable optoelectronic products and solutions. Beijing Jinkun Technology Co., Ltd. mainly producesMicrowave fiber optic transmission module, RF fiber optic transmission module, RFFiber optic transceiver，fdl，high speed optical switch，Uniform light spot environment,RF fiber optic moduleWaiting for products,Welcome to consult!www.jonkon.com.cn，
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-