QT843 Domestic Communication Management Machine-Global supplier

13th Floor, Building I1, Zhongjian Optics Valley Star, No. 799 Gaoxin Avenue, Donghu High tech Zone, Wuhan City

QT843 Domestic Communication Management Machine

1、 Product Introduction

The first domestically produced communication management machine QT-843 in the Shan series (1U/2U chassis) is a nationwide application product consisting of a Loongson 2K1000 processor, a domestically produced Kirin operating system, and domestically produced QTouch software.

The product is shown in the following figure:

2、 Product and Specifications:

3、 Product Details

1. Loongson 2K1000

The latest generation 2K1000 dual SOC processor adopts high seismic resistance, full surface mount modular design, and is compatible with COMExpress Type10pin pin definition. The module maximizes the advantages of over 2K I/O interfaces, including SATA, CAN, and serial ports USB、 Gigabit Ethernet port, GMAC, PCI-E and other interfaces; Supports DVI and 24 bit LVDS signals. The module is MiniModule (84mmx55mm), which supports DC8-13V wide voltage input and has an overall power consumption of less than 10W. It can be widely used in fields such as information security, power, scientific research, healthcare, signal processing, data communication, intelligent transportation, navigation, etc.

2. Winning the bid for the Kirin operating system

Zhongbiao Qilin Desktop Operating System is a graphical desktop operating system designed for desktop applications. It is independently developed for domestic CPU platforms such as X86 and Loongson, and has taken the lead in supporting X86 and domestic CPU platforms, providing the best performance operating system products. By further adapting and supporting hardware peripherals, optimizing desktop applications, and building application scenario solutions, we fully meet the needs of project support, application development, and system customization.

4、 QTouch configuration software

QTouch cross platform automation software is designed with a cross platform library, integrating functions such as device communication, graphic display, data conversion, and logic processing, providing a secondary development automation platform software. It is characterized by powerful functions, rich protocols, simplicity and ease of use, and cross platform support. It is the first automation platform software in China and has an international leading level.

1.1 Cross platform support

QTouch cross platform automation software supports numerous operating systems, enabling multi platform operation and collaboration. It has multi platform support, unified development platform, and multi platform collaborative operation, realizing smart IoT. The supported operating systems are as follows:

The download and installation described in the remarks can be downloaded and tried from the official website: www.sitcsys.com.

1.2 Intelligent processor support

QTouch has excellent support performance, especially on smart terminals. In addition to supporting general-purpose Intel processors, it also supports RISC processors based on ARM architecture, domestic processors, etc., making it easy for users to quickly assemble their own intelligent products using QTouch software.

1.3 Operation mode

The QTouch operating mode is divided into design and development environment and runtime environment. The design and development environment can be run on a desktop or laptop, while the runtime environment can be run on various devices by simply downloading through USB or RJ45 network. The operation mode is shown in the following figure:

1.4 Function List

QTouch software integrates four major automation applications, including device communication, graphical interface, data conversion, and logic processing, and provides a unified secondary development environment. It supports four operating modes: intelligent device operation, web access interface, mobile APP application, and local computer operation.

The function list is described as follows:

The application support instructions are as follows:

1.5 Typical application directions

QTouch has four automation related functions and four application modes, covering almost all applications related to industrial automation. Especially in the application of industrial equipment networking, it has a multi-dimensional implementation method, which not only provides a basic platform for automation control and management, but also has a multi system and multi-dimensional access solution. It is the most advanced platform software in the trend of intelligent development. Its typical applications are as follows:

2. Detailed explanation of QTouch technology

2.1 QTouch Download and Installation

Users can download QTouch software from the official website of Wuhan Shuntong Intelligent Technology Co., Ltd., located at www.sitcsys.com. The download page includes the following versions and content:

2.2 QTouch Project Manager

After the user installs QTouch, there are two icons on the desktop: QTouch Project Manager and QTouch Run. QTouch Project Manager is the secondary design platform for the project, while QTouch Run runs the designed project on the computer. Display as follows:

The project manager has the following design functions:

2.3 Graphic Design

After the user establishes the project through the project manager, by creating a screen and double clicking to start the editing environment of the screen, the user can design the screen and associate the running data on the drawing tool, as shown below:

The drawing system has the following design functions:

The JS development environment is shown in the following figure:

2.4 Equipment Communication Management

By using QTouch's engineering manager to set up communication devices and configure variables, users can quickly build a device communication network and access and manage data. The system interface is as follows:

After the device is established, configure the device communication point table on the database configuration tool. Only after completing the point table configuration can the QTouch system obtain data from the device through the communication line and enter the QTouch database system. The display is as follows:

2.5 Logic Programming

QTouch has rich logic programming capabilities and provides two logic processing methods, one is a softPLC based on IEC61131-3 standard and the other is an editing and compilation system based on C language. Through the two provided logic programming methods, any logic processing algorithm can be implemented.

The programming environment for ladder diagrams is as follows:

The C programming environment is shown below, where users can embed their own C language or develop their own by calling QTouch memory data or SQL data through APIs.