The pulse type remote water meter produced by Beijing Yihai Zhuocheng Water Meter Company isIt is to install a self holding switch type water meter sensor on the basis of a regular mechanical water meter, which converts the mechanical reading of the water meter into a regular one5/0VA remote water meter with switch pulse signal. It has the characteristics of anti magnetism, waterproof, accurate signal, stable performance, and reliable quality, which can effectively overcome the shortcomings of traditional remote water meters such as false signal transmission at critical points (such as water hammer phenomenon), lack of anti magnetism, and damage to the mechanical structure of water meters.

Pulse type remote water meters can be customized into products of different materials according to user requirements.

1、 Purpose:

Used to measure the total amount of drinking water flowing through the tap water pipeline and transmit the water consumption signal to the secondary instrument over long distances.

2、 Characteristics:

This series of water meters is a rotary dry water meter, with magnetic rotation between the impeller and the counter, combined display of the dial and pointer, convenient reading, long-term clarity, waterproof and frost resistance, long service life, and each flow10Rising (or100Rising1000Water sends a signal.

3、 Usage conditions:

Water temperature: ≤40℃ (when the water temperature is ≤90Please customize a hot water message table when the temperature is ℃.

Water pressure: ≤1MPaThe transmitter cannot be immersed in water.

Signal type: reed switch or Hall element signaling [Note: Hall element signaling commonly uses working current]5mALeft or right, or working current less than50uA(Bipolar) or20uA(Special instructions are required when ordering).

4、 Product features:

1. It has a self holding function, which ensures that the dedicated magnetic needle can only emit a pulse signal every 360 degrees of rotation. The remote water meter is equipped with a magnetic interference self release function, which can effectively overcome the weak point of signal transmission caused by critical point vibration such as water hammer phenomenon, and has an anti external magnetic interference function.

2. High accuracy: The measurement accuracy meets the ISO4046 standard, and the transmitted signal is error free.

3. High universality: Suitable for all national standard water meters, it can fully adapt to the technical requirements of different meter reading systems, and the output pulse width of the remote water meter is greater than 80ms.

4. Strong anti-interference ability: It adopts a stainless steel shell and is protected by a stainless steel hose to prevent human damage. The self resolving function of magnetic interference enables the remote water meter to work normally under strong artificial magnetic interference, and the lifespan of the magnetic needle can reach more than 6 years.

5. Without damaging the structure and performance of ordinary water meters, the entire remote water meter meets the performance indicators of ordinary water meters.

6. Signal transmission method: Passive switch on/off, with disconnection and short line alarm functions. According to customer needs, two-wire or three wire systems can be used. Combining with a remote water meter and outdoor display device makes reading more convenient.

7. Pulse equivalent: 1 liter, 10 liters, 100 liters, 1000 liters, and 10 tons.