VIP member
Programmable controller (CPU unit) FP7 series CPU unit AFP7CPS21
Corresponding to EthernetNet/IP functionality. The 7 major "savings" for the PLC that brings good news to the manufacturing site have been born.
Product details
7 major 'savings'
PLC, which brings good news to the manufacturing site, has been born.
|
 ※1
|
 ※2
|
| ※1 | EMC Directive (excluding AFPRP2 □) |
|---|---|
| ※2 | Not including some models |
EtherNet/IP functionality was implemented in September 2015.
The low-cost CPU unit [AFP7CPS21] was launched in April 2015.
feature
Most suitable for simple independent systems [CPU unit low-cost type (AFP7CPS21)]
Realize high functionality scalability and low cost/narrowness.
|
Provincial spatialization |
|
|
Low cost
AFP7CPS31 → AFP7CPS21 significantly reduces costs.
|
Visualization of on-site intelligence collection and transmission
To change the state of the manufacturing site, FP7 has strengthened its intelligence function.
The convenience of use has been further improved, and FP7 has undergone significant evolution.
|
|
Convenient data recording and transmission
The data stored in FP7 can be transmitted on a computer for easy information statistics.
Implement traceability.
|
|
|
|
On site visualization
The system status is uploaded to the web server.
Browser viewing function.
|
|
[Email Information Notification]
Email notifications to users about the working status and daily reports of the device, as well as emergency notifications in case of malfunctions.
|
|
Can communicate with up to 220 machines
Most control machines such as PLCs and information machines such as PCs can communicate easily on EtherNet.
|
Version Information
This feature can be used on the following versions of CPU units and tool software.
Control FPWIN GR7: See 2.3
CPU Unit: Firmware Ver. 3.0
CPU units released after December 2013 (Ver. 2.0 onwards) can be upgraded to corresponding firmware versions.
Please consult for details.
|
|
1.Starting from the idea of "saving" programming time.
Block the functionality of the program and allow multiple people to share the responsibility of writing it.
|
2.Focus on "saving" debugging time
During debugging, the timing of contact actions in each scan can be confirmed.
|
|
3.Progressiveness: "save" the working hours for taking safety measures.
Prevent the device from experiencing program plagiarism at the receiving location.
|
Due to the ability to finely divide the access permissions of CPU units, it can prevent easy tampering of programs and program leakage.
4.Eliminating work monitoring has improved convenience.
It can remotely monitor the working status of the PLC and retrieve the data stored in the SD card.
|
|
Ethernet Communication Plugin AFP7CCET1 
Serial communication and Ethernet communication can be added to the CPU body.
One CPU unit can achieve communication with two networks.
| ※ | Serial communication units cannot be used. |
|---|---|
| ※ | When using plugins, the software version of the CPU unit must be Ver. 1.3 or higher. |
|
5.Unique and innovative, "saving" maintenance.
|
|
Backup data without battery, no need to replace battery.
Due to the absence of batteries, maintenance of the device can be reduced. In addition, the power supply of the device can be easily cut off to achieve power saving.
| project | battery-free | with battery |
|---|---|---|
| Program maintenance (Note 1) | ○ | ○ |
| Data register retention | ○ | ○ |
| The work of calendar/clock | △ (Note 2) | ○ |
| (Note 1): | The maximum backup DT is 256k |
|---|---|
| (Note 2): | Keep it in an unpowered state for about 1 week (when powered on, it needs to be powered on for more than 30 minutes) |
Regarding the built-in calendar/clock, the calendar can also be adjusted through Ethernet, so if adjustments are made when the power is turned on, a battery free system can be constructed.
Automatically measure the number of open and close contacts and ON time to determine the maintenance period of the equipment.
| Input contact X: | Automatically measure and record the total ON time and ON times of input connected devices. |
|---|---|
| Output contact Y: | Automatically measure and record the total ON time and ON times of the output connected devices. |
| Can grasp the maintenance period of relays, motors and other equipment. |
CPU unit
Compact body, rich expansion functions.
The low-cost model (AFP7CPS21) that is most suitable for simple independent systems has been released.
|
1. Connect extension plugins through the plugin interface provided on the main body for simple function expansion |
| The firmware 'FP7 CPU Unit Version Upgrade Software' for the CPU unit can be upgraded to the latest version. The FP7 CPU unit version upgrade software can be downloaded for free from the website. When using new features or units, please update the CPU unit to the latest version. >>Please click here to download |
| Product Name | standard program capacity |
maximum program capacity |
operation speed |
Ethernet function (Note 2) |
SD card function |
Order product number | |
|---|---|---|---|---|---|---|---|
| F P 7 C P U single yuan |
standard form | 196k steps | 234k steps | 11ns～ | built-in | built-in | AFP7CPS41E |
| 120k steps | 120k steps | 11ns～ | built-in | built-in | AFP7CPS31E | ||
| 120k steps | 120k steps | 11ns～ | - | built-in | AFP7CPS31 | ||
| Low cost type | 64k steps | 64k steps | 14ns～ | - | - |
AFP7CPS21 |
|
| (Note 1): | Comes with one terminal unit. |
|---|---|
| (Note 2): | Ethernet functions include FTP server/client, web server, HTTP client, email sending EtherNet/IP。 Ethernet is a registered trademark of Fuji Xeros Corporation and Xerox Corporation in the United States. |
CPU unit
Control specifications
| project | AFP7CPS41E | |||||
|---|---|---|---|---|---|---|
| memory capacity |
Memory selection mode (Note 1) |
1 | 2 | 3 (at factory) | 4 | 5 |
| Program (steps) (Note 2) |
234,000 | 221,500 | 196,000 | 144,500 | 51,500 | |
| Data Register (W) (Note 2) |
65,536 | 131,072 | 262,144 | 524,288 | 999,424 | |
| Maximum PB count | 468 | 443 | 392 | 289 | 103 | |
| project | AFP7CPS31E／AFP7CPS31 | ||||
|---|---|---|---|---|---|
| memory capacity |
Memory selection mode (Note 1) |
1 (at factory) | 2 | 3 | 4 |
| Procedure (Steps) (Note 2) | 121,500 | 96,000 | 64,000 | 32,000 | |
| Data Register (W) (Note 2) | 131,072 | 262,144 | 425,984 | 589,824 | |
| Maximum PB count | 243 | 192 | 128 | 64 | |
| project | AFP7CPS21 | ||
|---|---|---|---|
| memory capacity |
Memory selection mode (Note 1) |
1 (at factory) | 2 |
| Procedure (Steps) (Note 2) | 64,000 | 32,000 | |
| Data Register (W) (Note 2) | 131,072 | 262,144 | |
| Maximum PB count | 128 | 64 | |
| project | AFP7CPS41E／AFP7CPS31E／AFP7CPS31／AFP7CPS21 |
|---|---|
| Program mode | Relay symbol |
| Control method | Loop operation |
| Program memory | Built in FLASH ROM (no need for backup battery) |
| Calculation processing speed | Basic instruction minimum 11ns (AFP7CPS21 is 14ns)/step~ |
| External input (X)/output (Y) | 8192 points (Note 4)/8192 points (Note 4) |
| Internal relay (R) | 32768 points |
| System Relay (SR) | Display the status of internal actions of various relays |
| Link relay (L) | 16384 points |
| Timer (T) | 4096 points, (10 μ s, 1ms, 10ms, 100ms, 1s are single) Count within the range of (bit) x 4294967295 |
| Counter (C) | Counting within the range of 1024 points and 1 to 4294967295 |
| Link Data Register (LD) | 16384 points |
| System Data Register (SD) | Display the status of internal actions of various registers |
| Index register (I0~IE) | 15 long characters/with switching function |
| Main Control Relay (MCR) | unrestricted |
| Number of labels (LOOP) | The maximum value for each PB is 65535 |
| Differential point number | unrestricted |
| Step number | unrestricted |
| Sub program ordinal number | The maximum value for each PB is 65535 |
| Number of Interrupted Programs | Regularly execute a program |
| SD card function | Up to 32GB of SDHC can be used, except for AFP7CPS21 |
| Fixed scanning | 可 (0ms～125ms) |
| Calendar/Clock (Note 3) | Year (Gregorian calendar 2 digits) · Month · Day · Hour (24-hour display) · Minute · Second · Week |
| battery life | 3.3 years or more (at 25 ℃) (value when completely without power) Excluding AFP7CPS21 |
| PLC link function | Up to 16 units, 1024 linked relays, and 128 word linked registers (Unable to perform data transmission and remote programming) (You can switch between the first half and the second half of the link area allocation) |
| (Note 1): | When leaving the factory, AFP7CPS41E selects mode 3, and AFP7CPS31E/AFP7CPS31/AFP7CPS21 selects mode 1. |
|---|---|
| (Note 2): | The maximum backup DT can reach 262144 words. |
| (Note 3): | Calendar accuracy: 0 ℃: monthly difference of less than 95 seconds, 25 ℃: monthly difference of less than 15 seconds, 55 ℃: monthly difference of less than 130 seconds. |
| (Note 4): | In fact, the number of points available for I/O is limited by hardware constraints. Can be used as an internal device when not actually used for I/O The relay. |
Communication specifications of COM port
| project | Specifications |
|---|---|
| interface | RS232C 3-wire 1ch (Note 1) |
| transmission distance | 15m |
| transmission speed | 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 bit/s |
| communication method | Half duplex mode |
| synchronization method | Start stop synchronization mode |
| Transmission format | 停止位 1 bit/2bit |
| Parity Check None/Yes (Odd Check/Even Check) | |
| Data length of 7 bits/8 bits | |
| Start symbol with STX/no STX | |
| Ending symbol CR/CR+LF/None/ETX | |
| Data transmission sequence | Send in character units, starting from bit 0 |
| connect | 通用通信 Computer links MODBUS-RTU |
| (Note 1): | The terminals SD, RD, SG are insulated from the internal circuit. |
|---|
GT monitor dedicated power output port specifications
| Terminal (Note 1) | connected device |
|---|---|
| 5V | Used for DC5V GT series |
| 24V (Note 2) | Used for DC24V GT series |
| (Note 1): | 5V and 24V cannot be used simultaneously. |
|---|
| (Note 2): | Regarding the power supply of the CPU unit, please use DC 21.6V to 26.4V. For the grounding treatment of GT programmable intelligent operation panel, please refer to the hardware manual of GT series. AFP7CPS21 does not come with this port. |
|---|
LAN communication port specifications [excluding AFP7CPS31/AFP7CPS21]
| project | Specifications |
|---|---|
| communication interface | Ethernet 100BASE-TX/10BASE-T |
| transmission speed | 100Mbps/10Mbps automatic negotiation |
| Total cable extension | 100m (500m when using relay) |
| number of nodes | Up to 254 units |
| Number of simultaneous connections | Maximum 220 (user connection 216, system connection 4) |
| Communication protocol (communication layer) | TCP/IP、UDP |
| DNS | Domain Name Server |
| DHCP/DHCPV6 | Automatically obtain IP address |
| FTP Server/Client (Enable SSL) |
Server function file transfer, 3 users Client function data and file transfer |
| HTTP Server/Client (Enable SSL) |
Server Function System WEB User's website (8MB), with 16 simultaneous sessions Client function data transmission |
| SMTP client (SSL enabled) | Client function email delivery |
| SNTP | Time adjustment function |
| 通用通信 | 16kB/1 connection (user connections 1-16) |
| Specialized communication | Substation communication (MEWTOCOL-COM、MEWTOCOL7-COM、 MEWTOCOL-DAT, MODBUS-TCP, MC protocol (Note 1) Main station communication (MEWTOCOL-COM，MEWTOCOL-DAT， MODBUS-TCP, MC protocol (Note 1) |
| (Note 1): | MC protocol is the abbreviation for MELSEC communication protocol, which is a registered trademark of Mitsubishi Electric Corporation. Only QnA compatible with 3E frames and binary (unified write, unified read) can be used. |
|---|
Web server specifications
| project | Specifications |
|---|---|
| Applicable CPU unit | Built in Ethernet functional CPU unit for Ver. 3.30 and above versions |
| Web server | Simultaneous access count: 16 connections System WEB: System monitoring function Customer Web: Maximum content capacity of 8MB |
| Control Web Creator Applicable OS |
Windows 7 and above |
| Accessing web servers Web Browser |
[Windows] Google Chrome、Mozilla Firefox、Opera、Internet Explorer [OS X] Safari、Google Chrome、Mozilla Firefox [iOS] Safari、Google Chrome [Android] Google Chrome |
| (Note 1): | Windows, as well as Windows 7 and Internet Explorer, are trademarks or registered trademarks of Microsoft Corporation in the United States and other countries. Google Chrome and Android are registered trademarks of Google Inc. Safari and OS X are trademarks or registered trademarks of Apple Inc. in the United States. IOS is a trademark or registered trademark of Cisco in the United States and other countries. Firefox is a registered trademark of Mozilla Foundation in the United States and other countries. Opera is a trademark or registered trademark of Opera Software ASA. |
|---|---|
| (Note 2): | Please use the latest version of OS and browser. Old models sometimes do not support running the latest version of browsers. |
CPU unit
AFP7CPS41E
AFP7CPS31E
AFP7CPS31
AFP7CPS21
|
purpose
Web server functionality
|
|
|
|
Web server functional communication environment
|
Email sending function (supports SSL)
|
|
FTP server functionality
|
FTP client functionality (supports SSL)
|
|
Optional parts
Optional accessories
| Product Name | Specifications | Order Product Number |
|---|---|---|
| Backup battery (FP-X common) | Battery backup for calendar timer operation | AFPX-BATT |
programming software
| Product Name | content | Specifications | Order Product Number | |
|---|---|---|---|---|
| Windows version utility software Control FPWIN GR7 |
Chinese text edition |
Only corresponding to password free function The CPU |
Windows ® 8.1 (32-bit/64 bit)/ Windows ® 8 (32-bit/64 bit)/ Windows7 ® (32-bit/64 bit)/ Vista/XP SP3 |
AFPSGR7CN |
| day this edition |
Only corresponding to password free function The CPU |
AFPSGR7JP | ||
| English language edition |
Only corresponding to password free function The CPU |
AFPSGR7EN | ||
| Windows version utility software Control FPWIN Pro7 |
Japanese version English version Chinese version Korean version |
Only corresponding to password free function The CPU |
Windows ® 8.1 (32-bit/64 bit)/ Windows8 ® (32-bit/64 bit)/ Windows7 ® (32-bit/64 bit)/ Vista/XP SP3 |
 AFPSPR7A |
| (Note 1): | Windows ® 8.1 Windows ® 8 Windows ® 7. Vista and XP are trademarks or registered products of Microsoft Corporation in the United States and other countries. |
|---|
Web Screen Creation Tool
| Product Name | content | Order product number |
|---|---|---|
| Control Web Creator | Windows version. It can be downloaded for free from our company's website. Please purchase a separate key. |
AFPSWC |
| key |
License key for Control Web Creator. |
AFPSWCKEY |
Control Web Creatorza can be downloaded from our company's website.
When downloading, you must log in to the 'Control Machine Website Member'.
>>Please click here to download the software
|
other
| product | Order Product Number | |
|---|---|---|
|
Terminal unit (accessory) Comes with FP7 CPU unit and extended slave unit. |
AFP7END |
|
FP7 terminal block (accessory) The input/output unit and analog input/output unit of the terminal desktop are included. (5 entries) |
AFP7TER |
|
Loose wire connector (40 cores) (accessory) FP7 input/output unit (MIL connector type), high-speed counting unit, position control unit, pulse output unit, and programmable input/output unit are included. (2 entries) |
AFP2801 |
|
Flat cable connector (40 cores) Used for FP7 input/output units (MIL connector type), high-speed counting units, position control units, pulse output units, and programmable input/output units. Flat cable is used for overall wiring. (2 entries) |
AFP2802 |
|
|
Loose wire crimping tool Transistor output type accessoryconnectorRequired during wiring. |
AXY52000FP |
connector terminal
Introduce the connector terminals that FP7 can use.
Wago Japan（株）
|
Connector terminal model |
|
PM-M32P-2081 (Lateral type, 40P poles, FP7 circuit) |
|
Cable model (MIL40P → MIL40P)
|
| For inquiries regarding connector terminals, please consult Wago Japan. URL： http://www.wago.co.jp/ 
|
|
Dongyang Technology Research Co., Ltd |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-