VIP member
Product material heating and drying equipment
Weiyasi Company specializes in producing various heating and drying equipment for products
Product details
Weiyas CompanySpecializing in the production of various heating and drying equipment for products. The advantages of this device are:
1. Penetrating heating, fast heating speed, uniform heating. Microwave heating is used to make the heated object itself a heating object, which can achieve uniform heating of any starting object, which is very beneficial for improving product quality.
2. Selective heating, energy-saving and efficient. Microwaves have different effects on materials with different dielectric properties, which is beneficial for drying and processing characteristics. Because water molecules have a better absorption effect on microwaves, parts with higher water content absorb more microwave power, resulting in higher thermal efficiency. Therefore, it is efficient, energy-saving, and improves the working environment.
3. Without thermal inertia, it has immediacy. Therefore, it can ensure high-quality processing materials.
4. Easy to operate and suitable for control. Microwave heating can instantly achieve the purpose of lifting and turning on/off, with minimal thermal inertia,
5. Environmental protection, cleanliness and hygiene. The equipment heating box is made of metal stainless steel and can be cleaned with water. The discharge is equipped with a fully sealed hopper and dust recovery device, and there is no generation of "three wastes".
6. Safe and environmentally friendly. Microwave energy operates in enclosed heating containers and waveguides made of metal, with minimal energy leakage;
Equipment technical parameters:
1. Microwave power: 30KW (adjustable)
2. Power supply: three-phase five wire 380V
3. Microwave frequency: 2450 ± 50MHz
4. Height of inlet and outlet: 50mm
5. Belt width: 750 mm
6. Transmission speed: 0-5 m/min
7. Dimensions (length x width x height): approximately 10460 x 1362 x 1750mm
8. Working environment: 0-40 ℃, relative humidity ≤ 80%
These products produced by our companyMicrowave drying equipmentBy adopting advanced design and sophisticated processing, the microwave leakage at the inlet and outlet, observation window, furnace door, etc. is significantly better than domestic standards, as microwaves do not pose radiation hazards or emit harmful gases. Due to the fact that the heating and drying equipment for product materials is non-standard, it can be referred to asPigment dryerThe above parameters are for reference only. Please call us directly for details.
1. Penetrating heating, fast heating speed, uniform heating. Microwave heating is used to make the heated object itself a heating object, which can achieve uniform heating of any starting object, which is very beneficial for improving product quality.
2. Selective heating, energy-saving and efficient. Microwaves have different effects on materials with different dielectric properties, which is beneficial for drying and processing characteristics. Because water molecules have a better absorption effect on microwaves, parts with higher water content absorb more microwave power, resulting in higher thermal efficiency. Therefore, it is efficient, energy-saving, and improves the working environment.
3. Without thermal inertia, it has immediacy. Therefore, it can ensure high-quality processing materials.
4. Easy to operate and suitable for control. Microwave heating can instantly achieve the purpose of lifting and turning on/off, with minimal thermal inertia,
5. Environmental protection, cleanliness and hygiene. The equipment heating box is made of metal stainless steel and can be cleaned with water. The discharge is equipped with a fully sealed hopper and dust recovery device, and there is no generation of "three wastes".
6. Safe and environmentally friendly. Microwave energy operates in enclosed heating containers and waveguides made of metal, with minimal energy leakage;
Equipment technical parameters:
1. Microwave power: 30KW (adjustable)
2. Power supply: three-phase five wire 380V
3. Microwave frequency: 2450 ± 50MHz
4. Height of inlet and outlet: 50mm
5. Belt width: 750 mm
6. Transmission speed: 0-5 m/min
7. Dimensions (length x width x height): approximately 10460 x 1362 x 1750mm
8. Working environment: 0-40 ℃, relative humidity ≤ 80%
These products produced by our companyMicrowave drying equipmentBy adopting advanced design and sophisticated processing, the microwave leakage at the inlet and outlet, observation window, furnace door, etc. is significantly better than domestic standards, as microwaves do not pose radiation hazards or emit harmful gases. Due to the fact that the heating and drying equipment for product materials is non-standard, it can be referred to asPigment dryerThe above parameters are for reference only. Please call us directly for details.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-