1Object of use

Liquid, gas, vapor pressure measurement, liquid level measurement.

2. Characteristics

● Comprehensive accuracy: 0.1%, 0.2%, 0.5%
Output selection: 4-20mA
Sensitive components and circuit boards are all solid structures, sturdy and vibration resistant.
Strong anti-interference ability and good temperature stability.
Explosion proof shell structure, suitable for all-weather use.
● It has the best anti-corrosion performance, ensuring the best anti-corrosion cost-effectiveness.
The structure is lightweight, simple and reasonable, without the need for brackets or horizontal installation, and can be directly installed in any position on the pipeline.

3. Performance and technical indicators

Measurement range: -100~0KPa 0~40MPa

It can achieve functions such as migration, range adjustment, zeroing, damping, and data recovery.

Power supply: 24V · DC; When there is no load, the transmitter can operate at 12V · DC, with a maximum of 36V · DC.
The relationship between load impedance R and power supply voltage V: R ≤ 50 (V-12) Ω
Temperature range: ambient temperature -40 ℃~80 ℃
Medium temperature -40 ℃~85 ℃
Storage temperature -40 ℃~85 ℃
Relative humidity: 0-95%.
Damping: 0.1S.
Stability: ± 0.2% of maximum range (1 year)
Temperature effect: Within -20~80 ℃, the variation is ± 0.15%/10 ℃.
Overpressure effect: After adding the overpressure limit internal pressure, the error is ± 0.25% of the maximum range.

Vibration effect: At a frequency of 15Hz in any axial direction, the error is less than ± 0.01%/g of the maximum range.
Power supply impact: less than 0.01%/V of the output range.
Load impact: If the input voltage meets the load characteristics, there is no load impact.

Isolation membrane: 316L stainless steel

Electrical connection: Hirschman connector

Process connections: M20 * 1.5, G1/2, G1/4, 1/2NPT, 1/4NPT, etc. (can be customized according to customer requirements)

4. Installation method

Pressure transmitters are usually installed directly through pipelines. It is recommended to install a valve once for ease of installation, commissioning, and maintenance.
When the temperature of the medium is higher than 85 ℃, a certain length of pressure pipe needs to be installed to facilitate the cooling of the medium, otherwise it may cause inaccurate measurement or even damage to the transmitter.