overview（Outline）

The gravity free dual axis propeller mixer has strong and efficient characteristics, with short mixing time and designed mixing time1~3minute,1:1000The uniformity of the advertising ratio is greater than95%The two mixing shafts inside the horizontal cylinder rotate in opposite directions at a constant speed, and the blades arranged at special angles on the shafts ensure that the material is thrown in three directions: radial, circumferential, and axial, forming a composite cycle and achieving uniform mixing in a very short time.

Structural characteristics（Structural features)

1.mixing effect
Even if there are differences in the specific gravity and particle size of the materials, good mixing effects can still be achieved under the rapid and intense agitation and scattering of the staggered mixing blades.

2.Crushing device
When the material has clumping and agglomeration phenomenon,Need to add a crushing device and maintain a "crushing rod" with a triangular toothed cover1400rpmThe above high rotation speed will crush and depolymerize agglomerated materials in the material weight loss zone.

3.Discharge form
The discharge form is generally pneumatic(hand movement)Flip valve and arc valve are tightly embedded in the cylinder, flush with the inner wall of the cylinder, without material accumulation or mixing dead corners; The standard model can be divided into large and small doors. The large door opens to the edge of the cylinder, allowing for clean and quick material discharge with minimal residue.

4.Two piece blade
To reduce the cost of replacing vulnerable parts of the equipment, the blade blades can be made into two pieces, and a movable small blade can be placed on the blade base to directly replace worn small blades, which is economical and fast.

5.Gap between blade and cylinder
The gap between the blade and the cylinder wall directly affects the mixing effect and the residual materials inside the machine after discharge; Our company's product blades and cylinder clearance are controlled within3~5mm.

6.20Cubic meter full volume
This series of mixers can achieve a maximum of20The cubic meter full capacity has significant differences from ordinary specifications in terms of transmission forms and mixer bases for large-sized equipment.

Technical Parameter(Technical Parameters)