The Sida potato starch drying equipment adopts the principle of instant drying, using the rapid movement of heat carrying air to drive wet materials and suspend them in hot air. This strengthens the entire drying process and improves the rate of heat and mass transfer. The non bound moisture of the materials dried by airflow can be almost removed (for example, the moisture content of starch and other materials in the feed is ≤ 40%, and the finished product discharge can be 13.5%), and the dried materials will not cause deterioration. The yield can be significantly improved compared to general drying machines, and users can achieve high economic benefits in the short term.
Sida Potato Starch Drying Machine, also known as Starch Drying Machine, Starch Drying Machine, Starch Drying Equipment, Starch Drying Machinery, etc. according to different dialects and habits. The Sida starch drying equipment is mainly used for drying starch, such as sweet potato starch, wheat starch, cassava starch, potato starch, potato starch, sweet potato starch, sweet potato starch, corn starch, banana starch, kudzu root starch, pea starch, mung bean starch, lotus root starch and other starches.

Advantages of starch drying equipment:

1. High drying intensity and low equipment investment: The processing capacity of airflow drying equipment is large, with a water evaporation capacity ranging from 50kg/h to 2000kg/h, while the equipment has a small capacity and low investment.

2. High degree of automation and good product quality: The airflow drying process is entirely carried out in pipelines, with a short drying time (only 0.5-2 seconds). Therefore, automation can be achieved, and the product does not come into contact with the outside world, resulting in minimal pollution and good quality.

3. Complete equipment supply and free selection of heat source: The basic model consists of an air filter, heater, feeder, drying pipe, fan, and cyclone separator. Users can purchase dust collectors or other auxiliary equipment as needed.

4. In terms of heating method selection, airflow drying equipment has great adaptability. Users can choose steam, electricity, thermal oil, or hot air stove heating according to the conditions in their region. At the same time, they can also choose according to the material's heat-resistant temperature (or hot air temperature): when ≤ 150 ℃, steam heating can be used. When ≤ 200 ℃, electric heating (or steam heating, electric compensation, or thermal oil heating) can be used; When the temperature is ≤ 300 ℃, coal-fired hot blast stove; When the temperature is ≤ 600 ℃. Oil fired hot blast stove. Short drying time, suitable for heat sensitive materials, the finished product does not come into contact with the outside world, is pollution-free, and has good quality;

5. The equipment is provided as a complete set, and the heat source can be selected from steam heating or matched with coal-fired, oil fired, gas-fired hot air stoves, etc.

6. Basic airflow drying equipment, suitable for materials that are loose, have low viscosity, and are finished as particles or powders. This process is illustrated as positive and negative pressure airflow drying, and users can choose the positive pressure drying method based on product characteristics.

Sida starch dryer shipment and customer installation site

Sida's starch dryer, also known as airflow collision vortex flash dryer, is designed for low-temperature and low tower starch drying process. Low temperature drying at 45 degrees Celsius, starch drying process does not gelatinize, starch quality, low tower reduces drying, efficient and energy-saving