Main features of the equipment:

The plasma cutting machine can cut any conductive metal material, including copper, aluminum, stainless steel, titanium, nickel, and other metals.

This model of equipment is mainly used for cutting thin plates in metal sheets. It has fast cutting speed, small heat affected zone, and almost no deformation of the sheet metal. It is currently the ideal plasma cutting equipment for thin plate cutting internationally.

Two major series with over twenty specifications, fully meeting the needs of large-scale cutting;

The rectifier diode has a withstand voltage of 2500V, ensuring that the plasma cutting machine is not broken down during arc initiation;

Be honest and reliable in your work.

☆ Adopting a cooling fan to provide a strong guarantee for a higher temporary load rate of the plasma cutting machine;

The control part adopts contactless bidirectional thyristor control, which avoids the phenomenon of contact burnout caused by relay control and greatly improves the reliability of the control part.

☆ Water cooled model: The electrode structure design is unique, and the cooling method is all-round water cooling. The electrode uses hafnium wire imported from the United States, and its service life is 2-5 times that of ordinary electrodes. HBD-40/HBD-60/HBD-100 is an air-cooled model, which does not include a cooling water tank and a water-cooled cutting gun. Special circumstances may require installation as needed;

☆ Powerful cutting ability, cutting thickness range can reach 1-140mm stainless steel.

The company has strong technical support capabilities for plasma cutting machines and can provide users with consultation and services for all plasma cutting solutions, including CNC flame plasma cutting solutions!

Main equipment configuration:

HBD-60 has one speed current regulation, while HBD-100 has two speed current regulation;

The overall structure of the plasma cutting machine is horizontal, with built-in rollers and lifting ears, making it easier to move and lift in the workshop;

☆ Each model does not require a water source, making it convenient for field operations;

HBD-60 is non-contact cutting, HBD-100 is non-contact cutting; (can be customized according to needs)

Non contact cutting ensures a longer lifespan for the nozzle;

All models are equipped with manual compasses, and the length can be customized;

The standard length of the cutting gun cable is 6 meters, and it can also be extended according to user needs;

☆ The straight handle cutting gun can be matched with the imitation cutting machine for imitation cutting;

☆ The straight torch can be paired with a semi-automatic cutting machine for semi-automatic cutting;

☆ Installing a CNC controller allows for fully automatic cutting with the gantry CNC cutting machine;

Any model can be paired with our portable CNC cutting equipment for cutting;

☆ Equipped with multiple protection devices, such as air pressure, overheating, etc;

☆ with phase loss indication;

☆ Arc ignition secondary boost to ensure that the coil has no breakdown phenomenon;

☆ The host comes with a free 2-year warranty, and the main control board comes with a lifetime warranty;

Note: Semi automatic and fully automatic cutting models must be non-contact cutting methods;

Technology continues to advance and products are constantly updated. The above parameters are for reference only!