One The uses of gearboxes include:

1. Acceleration and deceleration, commonly known as gearbox.

2. Changing the transmission direction, for example, we can use two sector gears to vertically transmit force to another rotating shaft.

3. Change the rotational torque. Under the same power conditions, the faster the gear rotates, the smaller the torque on the shaft, and vice versa.

4. Clutch function: We can separate the engine from the load by separating two originally meshing gears. For example, brakes and clutches.

5. Allocate power. For example, we can use an engine to drive multiple slave shafts through the gearbox main shaft, thereby achieving the function of one engine driving multiple loads.

2、 The application of gearboxes in motors

The gearbox is widely used in electric motors, often in wind turbines, and is an important mechanical component. Its main function is to transmit the power generated by the wind turbine under the action of wind to the generator and obtain the corresponding speed. Usually, the speed of the wind turbine is very low and far from the required speed for generator power generation. It must be achieved through the acceleration effect of the gearbox gear pair, so the gearbox is also called an acceleration gearbox.

Secondly, the gearbox also has the following functions:

1. Acceleration and deceleration, commonly known as gearbox.

2. Changing the transmission direction, for example, we can use two sector gears to vertically transmit force to another rotating shaft.

3. Change the rotational torque. Under the same power conditions, the faster the gear rotates, the smaller the torque on the shaft, and vice versa.

4. Clutch function: We can separate the engine from the load by separating two originally meshing gears. For example, brakes and clutches.

5. Allocate power. For example, we can use an engine to drive multiple slave shafts through the gearbox main shaft, thereby achieving the function of one engine driving multiple loads.

6. Gearbox installation methods: horizontal, vertical, swing base type, torsion arm type.

7. The gearbox series products have 3-26 specifications, with 1-4 reduction transmission stages and a speed ratio of 1.25-450; Combining with the R, K, and S series results in a larger speed ratio.

Shanghai Kaidi provides various types of servicesSpeed motorWe are authorized agents for RADIO-ENERGIE, POSITAL, Fenner, ELTRA, and other products such as photoelectric encoders, rotary encoders, tilt sensors, absolute value encoders, overspeed switches, incremental encoders, and Fenner from the UK. Our overspeed switch and encoder products are affordable and of more reliable quality. If you have any needs, we welcome you to call us for consultation.