1、 Overview:
Anaerobic oven wafer packaging anaerobic box, non oxidizing oven. During operation, the studio is filled with inert gases CO2 and N2 to prevent materials from being oxidized during baking. The use of non oxidizing ovens in industry: IC packaging, LCD, Transistors, sensors, diodes, quartz crystal oscillators, hybrid integrated circuit boards

2、 Product Technical Parameters
1. Name and model: Dual chamber anaerobic oven AO-2DSL FCNET (supporting ONET-240 network connection function)
2. Main technical indicators:
2.1 Working dimensions: W1000 * D500 * H610 * 2 mm
2.2 Power Supply: 380V 3 φ 50HZ 18KVA
2.3 Oxygen content control should be<=100PPM.
2.4 Temperature range: RT (room temperature)+60~+300 ℃;
2.5 Temperature uniformity: ± 1.5%;
2.6 Heating rate: Room temperature~250 ℃, 45 minutes (empty box test). (Customer process high temperature 300 ℃)
2.7 Air cooling: The temperature can drop from 250 ℃ to 70 ℃ within 100 minutes

3. Box structure:
3.1 The oven is assembled from the box body, electrical control cabinet, electric heating and air duct system, with a reasonable structure and a beautiful appearance;
3.2 Full week argon welding, high temperature resistant silicone compression, SUS304 # stainless steel electric heating generator, to prevent the machine itself from generating dust;
3.3 Box Material: The outer box is made of SS41 # medium carbon steel plate treated with phosphate film salt and coated with two layers of anti gloss paint to prevent dust;
3.4 Inner liner material: Imported SUS304 # Japanese made 800 series 2mm thick mirror stainless steel plate is used, and cleaned with alkaline soda water to remove oil stains and avoid the formation of PART during baking;
3.5 Medium bucket material: Made of imported SUS304 # Japanese 800mm thick mirror stainless steel plate, cleaned with alkaline soda water, degreased and sealed with argon welding (anti pollution).
3.6 Thermal insulation material: aluminum silicate cotton;
3.7 Mezzanine cooling: Mezzanine air-cooled cooling

4. Temperature control system
4.1 The controller adopts a 2-in-1 PLC touch screen to control the independent operation of two chambers, which can be switched at any time.
4.2 Temperature measurement: using a specially designed platinum resistance device;
4.3 Nitrogen Control System: An intelligent nitrogen control system with dual flow meters.
5. Complete safety protection measures: residual current circuit breaker//over temperature protection//under phase protection//motor overload current protection//machine abnormal buzzer warning