ZP-UHZSeries intelligent photoelectric dual color liquid level gaugecorrectMagnetic flap level gaugeThe upgraded product displays the liquid level clearly with red and green light columns, with a daytime observation distance of 60m and a nighttime observation distance of 200-300m. The magnetic flap level gauge is prone to dust accumulation after prolonged use, especially in steel mills. Over time, it is prone to fine iron filings, which can cover the color of the magnetic flap and prevent it from seeing the liquid level. In addition, the biggest drawback of the magnetic flap level gauge is that it cannot display light and cannot be observed at night. The ZP-800GD series intelligent photoelectric dual color liquid level gauge selects electronic components from both domestic and foreign sources. The entire machine has undergone various performance measurements, simulation tests, and mechanical aging tests to ensure accurate and reliable liquid level display.
This product is suitable for departments such as petroleum, chemical, metallurgical, food, brewing, pharmaceuticals, chemical fibers, fertilizers, environmental protection, electricity, water supply, etc. It is used to measure the liquid level in pressurized or open containers. The measuring instrument can directly display the liquid level on site, and can also be equipped with remote liquid level transmission. It can be directly connected to DCS to achieve remote liquid level monitoring.

advantage:
1. The water level display is clear, the color is bright, the observation angle is large, and the visible distance is far.
2. Scope of application: * * Suitable for liquid level display on large liquid containers for users such as refineries, steel mills, coking plants, power plants, oilfield joint stations, chemical plants, etc.
3. Widely applicable media: corrosive solutions such as water, dilute oil, alkaline solution, liquid ammonia, hydrochloric acid, sulfuric acid, etc. (specify media when ordering).
4. It can display the liquid level on-site and remotely.
Technical parameters:
Installation method: Vertical installation
Power Supply Voltage: 5VDC Manufacturer comes with power box, remote transmission 24VDC
Measurement range: 0-150-6000mm (orders can be negotiated for sizes greater than 6000mm)
Accuracy: ± 10mm
Medium density: 0.4-2.0g/cm3
Work pressure:- 0.1～42MPa
Working temperature:- 160～530℃
Environmental vibration: frequency ≤ 25Hz, amplitude ≤ 0.5mm
Follow speed: ≤ 0.08m/s
Medium viscosity: ≤ 0.4Pa·S
LED display: low brightness type, high brightness type, and foggy diffuse type are available for selection
Discharge valve: stainless steel ball valve, needle valve
Connecting flange: DN15～DN50