project

Instructions

Product Name

Online thermal aging cabinet

model

YF-2500

studio dimensions

2600 × 1650 × 600mm (width × height × depth)

outer box dimensions

Subject to the actual product

Volume (L)

2500L

temperature range

RT+10℃～+80℃

Common temperature+60~+80 ℃

warm-up time

Heat up from room temperature (+10 ℃) to 100 ℃ for about 20 minutes

temperature fluctuation

≤±3℃

Temperature distribution error

±3℃

Control instrument accuracy

±0.5℃

室体外壁材料

Cold rolled powder baking paint

Interior materials

stainless steel

thermal insulation material

aluminum silicate

Wind circuit components

Centrifugal fan (note: fan cooling device needs to be installed for temperatures below 400 ℃)

door

Double door, double-layer glass structure

Ventilation holes and pipelines

Exhaust hole, intake hole

Temperature control method

PLC programming control

shelf board

Divide equally into 5 layers, with 5 distribution boards

power

Total power approximately: 8.0kw Constant temperature power approximately 1.0kw

project

Principle Description

heating system

Built in nickel chromium alloy heater, pollution-free and long service life;

Completely independent system, without affecting the control circuit.

project

description

Temperature cycle mode

Forced circulation ventilation, balanced temperature control method (BTC). This method refers to the control system operating continuously in a cyclic system according to the set parameters
The temperature point is automatically calculated by PID to control the output of the heater, ultimately achieving a dynamic balance.

Temperature cycling device

Built in air chamber, circulating air duct and stainless steel centrifugal fan, using an efficient energy regulation system, through
Efficient ventilation fans perform effective heat exchange, improve the airflow of the air, increase the air flow rate, and
The heat exchange capacity of the heater; The wind source is driven by a circulating motor to drive the wind turbine through an electric heater, and the hot air is transported through the air duct
Sent to the inside of the oven, and the hot air after use is sucked into the air duct as a source for further circulation heating, thereby reducing energy consumption
Measure the loss and ensure the temperature uniformity inside the box. When the door opens or closes and causes disturbance, it can be used to supply air
The circulation system quickly returns to the operating state temperature value

project

Instructions

temperature measurement

PT100

Aging monitoring

The monitoring system is controlled by PLC programming, and the human-machine interface is displayed on a 10 inch large touch screen. It independently monitors the aging status of each product online, can synchronously set temperature and aging time, and can synchronously monitor the current of each product; Synchronously record the current of each product, and also record whether the aging status of each product is normal (the monitoring screen displays the running indicator light), whether there is an alarm, whether it is NG. The results of each aging will be automatically stored locally and can be downloaded from a USB flash drive.
The monitoring screen displays the output voltage, which is adjustable (5V/12V)
In the secondary operation settings, customers can set the standard and fluctuation values of current and voltage by themselves, and control the permissions on the interface
The program can scan codes (one-dimensional codes) and collect, record, store, and provide traceability channels for the digital encoding of each aging product
The power supply of the product is controlled by PLC to achieve separate power supply and power-off for the product. The power supply is adjustable DC output, with an adjustable range of 5-12V and a maximum current load of 60A;

project

Instructions

1

Grounding protection device;

2

Phase loss protection (limited to three-phase power);

3

Independent studio overheating protection;

4

Heater short circuit/overload protection;

5

Overload protection for blower motor;

6

Power outage protection.

project

Instructions

power supply

220±10％v; 50±1％Hz

ambient temperature

+5～+40℃

ambient humidity

≤85％R. H；