This analyzer is a fully automatic environmental online instrument developed according to the national standard analysis method. The instrument automatically completes the process from water sample collection, analysis reaction to measurement value
The entire process of display, storage, and remote data transmission. It can analyze chemical oxygen demand, ammonia nitrogen, total phosphorus, total nitrogen, and heavy metals.
This product is widely used for the detection of industrial and domestic wastewater, automatic detection of various contents in lake and river sections, and control of total sewage discharge.
Adopting sequential injection quantitative loop technology, the structure is simple, the failure rate is low, the use of reagents is minimal, and the operating cost is low.
The quantitative system is stable and reliable, superior to conventional photoelectric fixed disks and quantitative tubes, and will not decay during long-term operation.
The automatic alarm for instrument failure and automatic recovery after power outage overcome the disadvantages of short service life and high failure rate of similar products.
Humanized design, easy operation, all functions of the instrument are completed through a friendly human-machine interface on the touch screen.
The instrument calibration, parameter recording, and analysis time can be set through remote control.
Strong universality, a universal platform for all chemical instruments, facilitating the stocking of spare parts in the later stage and shortening maintenance cycles.
● Easy to customize; The proportional coefficient between ranges is constant, achieving accurate measurement of all ranges by calibrating a single range.
High stability and significantly better repeatability than the national standard.
Environmental monitoring, water quality monitoring of water conservancy
Urban sewage pipeline network and marine water quality monitoring
Sewage treatment industry, chemical industry, papermaking industry, etc
Measurement principle: UV full spectrum method
Measurement range: (0-200.0mg/L); (0-500.0mg/L) (expandable)
Zero drift: not exceeding ± 5mg/L within 4 hours
Stability of indication: not exceeding ± 10% within 24 hours
Accuracy: The standard sample is less than ± 2% F.S., and the water sample is less than ± 20%
Measurement cycle: every 5 minutes for testing
Environmental temperature: Recommended temperature (5-40 ℃)
Humidity less than: ≤ 85% (no condensation)
Insulation impedance: Above 20M
Digital Communication: RS232/Modbus
Analog communication: 4-20mA
Power requirement: (220 ± 22) VAC; (50 ± 1) Hz equipment power<200W
Data storage: Can store COD values and related curves for 5 years
Chassis size: 600 * 450 * 1560mm
Product Selection
Principle. UV multispectral
Cleaning: medium cleaning
Zero calibration: automatic extraction of zero calibration solution
Installation extraction: (desktop/wall mounted)
Protection: IP43 (protected from 45 degree oblique rain)