OMPS-E12/2-ISO isolated network power supply 2-in-1 lightning arrester power supply network 2-in-1 surge protector-Global supplier

8th Floor, Building 6, Pingshan High tech Intelligent Manufacturing Industrial Park, No. 2 Kengda Hetian Road, Pingshan District, Shenzhen

Product Introduction
Omrdon OMPS-E12/2-ISO, OMPS-E24/2-ISO, OMPS-E220/2-ISO isolated power network combination surge protector (also known as power network two in one lightning arrester, power network two in one lightning arrester, power network two in one surge protector) is designed according to IEC and GB standards, mainly used for lightning electromagnetic pulse (LEMP) protection of various weak current equipment, security equipment, telecommunications equipment, network equipment power supplies and 100M network signal lines. It is an integrated multifunctional surge protector.
Functional features:
1. Maximum current capacity: 10KA or 20KA (8/20 μ S), the power supply line adopts a two-stage composite balanced safest line, differential mode (line to line), common mode (line to ground) full mode protection, residual voltage, especially suitable for outdoor equipment with high lightning energy and strict requirements for residual voltage values.
2. The internal network circuit also adopts a two-stage series composite protection, differential mode (line to line), common mode (line to ground) full mode protection, residual low voltage, and long service life;
3. Network protection has clutter isolation function, isolates signal interference, enhances signal transmission rate, and is particularly suitable for long-distance signal transmission
4. Can effectively prevent equipment damage caused by instantaneous increase in potential difference between power supply, network and other lines;
5. Adopting an integrated structure and minimizing volume while meeting relevant parameters, without taking up space;
6. Power surge protection port with LED failure indicator (green: normal; off: failure);

name	Isolation type power network combination surge protector
SPD category	composite typeSPD
SPD function	Equipped with voltage and current limiting functions
model	OMPS-E12/2-ISO		OMPS-E24/2-ISO		OMPS-E220/2-ISO
type	power supply	network	power supply	network	power supply	network
Nominal operating voltage Un	12V	5V	24V	5V	220V	5V
Maximum continuous operating voltage Uc	18V	8V	30V	8V	320V	8V
Nominal load current IL	5A	500mA	5A	500mA	5A	500mA
Nominal discharge current (8/20 μ S) In	5kA/10KA	5kA	5kA/10KA	5kA	5kA/10KA	5kA
Maximum discharge current (8/20 μ S) Imax	10kA/20KA*	10kA	10kA/20KA*	10kA	10kA/20KA*	10kA
Voltage protection level (In) Up	≤36V (8/20μS)	≤20V x-x(1.2/50μs)	≤75V (8/20μS)	≤20V x-x(1.2/50μs)	≤900V (8/20μS)	≤20V x-x(1.2/50μs)
response timeTa	≤25ns	≤1ns	≤25ns	≤1ns	≤25ns	≤1ns
Transmission rate Vs	-	100M bps	-	100M bps	-	100M bps
insertion lossAe	-	≤0.3db	-	≤0.3db	-	≤0.3db
interface type	terminal block	RJ45/1236	terminal block	RJ45/1236	terminal block	RJ45/1236
Installation wiring specifications	2.5mm²	--	2.5mm²	--	2.5mm²	--
Failure Indication	Green: Normal extinguishing: Failure	--	Green: Normal extinguishing: Failure	--	Green: Normal extinguishing: Failure	--
overstressed fault mode	The voltage limiting part of SPD has an internal open circuit on the network side, and the circuit is not running, but the equipment is still protected by the open circuit
temperature range	-40℃…+85℃
Overall dimensions	106mmx58mmx35mm
housing material	aluminum alloy
Shell protection level	IP20
Test Standard	GB18802.1 GB/T 18802.21

packagingbox：CTN.	carton packaging
Quantity: QTY	1 PCS
Size: DIM	L115W38H72mm
Weight (gross): G.W	300g
Weight (net): N.W	330g