Product Introduction
The NT6101 environmental grade X and gamma dose rate meter is a universal instrument for monitoring gamma radiation dose rates in various radioactive workplaces. Adopting the American TI ultra-low power processor solution, this instrument has a wider dose rate measurement range and good energy response characteristics compared to similar instruments. This instrument is widely used in various occasions that require radiation environment and radiation protection testing, such as medical, disease control, environmental protection, metallurgy, petroleum, chemical, radiation laboratory, commercial inspection, industrial flaw detection, radiation processing, mining, etc.
Features:
-High sensitivity, wide measurement range, and excellent energy response characteristics;
-High speed low-power microprocessor unit;
-Digital and ruler display of dose rate status;
-Bilingual menu style operating interface in both Chinese and English;
-Dot matrix LCD display with high brightness backlight function;
-Both dose rate and cumulative dose can be measured;
-Equipped with two-level dose rate threshold alarm function;
-Detector malfunction alarm function;
-Real time display of battery level;
-Lightweight and ergonomically designed ABS and aluminum alloy casing;
-Extended design for protecting operators, with a standard length of 40cm and the option to extend up to 100cm;
-Built in 20000 sets of dose rate storage data, which can be viewed at any time without loss during power outages;
-Optional USB data transfer function;
-Optional Bluetooth, Bluetooth printer, or WiFi data transmission;
-Optional dual battery mode (with built-in lithium battery).
Technical Indicators:
-Detector: 30 × 25mm, NaI scintillation crystal;
-Sensitivity: 1 µ Sv/h ≥ 350CPS;
-Measurement range: Dose rate: 0.01 to 600.00 µ Sv/h;
Cumulative dose: 0.00 µ Sv to 99999 µ Sv;
-Energy response: 48keV~3MeV ≤± 30% (relative to137Cs);
-Relative error: not exceeding ± 10%;
-Measurement time: 1-250 seconds can be freely programmed;
-Alarm threshold: two-level alarm, 0.01-999.99 programmable;
-Display unit: can be automatically adjusted according to the range,
Dose rates: nSv/h, µ Sv/h, nGy/h, µ Gy/h,
Counting rate: CPS;
-Power consumption: Two universal No.2 batteries, with a total power consumption of less than 80mW;
-Weight: 1kg;
-Size: 40 × 20 × 7.5 (cm);
-Temperature range: -15 ℃~+45 ℃;
-Humidity range: ≤ 95% RH.
Configuration list:
Standard configuration: Instrument, portable waterproof case, battery, operation manual.
Optional accessories: lithium battery, Bluetooth printer, WiFi module.

Features:
-High sensitivity, wide measurement range, and excellent energy response characteristics;
-High speed low-power microprocessor unit;
-Digital and ruler display of dose rate status;
-Bilingual menu style operating interface in both Chinese and English;
-Dot matrix LCD display with high brightness backlight function;
-Both dose rate and cumulative dose can be measured;
-Equipped with two-level dose rate threshold alarm function;
-Detector malfunction alarm function;
-Real time display of battery level;
-Lightweight and ergonomically designed ABS and aluminum alloy casing;
-Extended design for protecting operators, with a standard length of 40cm and the option to extend up to 100cm;
-Built in 20000 sets of dose rate storage data, which can be viewed at any time without loss during power outages;
-Optional USB data transfer function;
-Optional Bluetooth, Bluetooth printer, or WiFi data transmission;
-Optional dual battery mode (with built-in lithium battery).

