VIP member
N-net 10/100/1000M fiber optic transceiver
The N-net10/100/1000Mbps adaptive Gigabit Ethernet fiber optic transceiver uses switching technology for media conversion and complies with IEEE802.3,
Product details
The optical interface of the N-net 10/100/1000Mbps adaptive Gigabit Ethernet fiber optic transceiver supports six transmission distances: 550m (multimode), 20km, 40km, 60km, 80km, and 100km. It supports three fiber transmission modes: dual fiber multimode, dual fiber single-mode, and single fiber single-mode, expanding the needs of users; The electrical interface supports 10/100/1000M adaptive, full/half duplex mode, and network cable cross/direct adaptive.
There is a wide range of product types, and users can choose between desktop and plug-in devices with built-in power supply according to their needs. Desktop products have built-in power supply, and users can choose the power supply mode (AC 220V/AC or DC-48V/DC) according to their needs, greatly meeting the high reliability and high performance network transmission needs of users in various environments; The plug-in card device is a modular fiber optic transceiver that can be installed in a compact and centrally powered sixteen slot chassis, supporting hot swapping.
Realize the conversion between 10M, 100M, and 1000M Ethernet electrical and optical ports
Optical interfaceSupports three fiber transmission modes: dual fiber multimode, dual fiber single-mode, and single fiber single-mode，Default type of optical port: SC interface
Complete transmission distance series，Can achieve up to 100-kilometer transmission
electrical interfaceSupport 10/100/1000M adaptive, full/half duplex mode, network cable cross/direct adaptive
Supports adaptive conversion between 10Base-T, 100Base TX, or 1000Base-T and 1000Base SX/LX
Fully compatible with Cisco, Huawei, 3Com
Using low-power chips, with low heat generation and no need for cooling facilities
Support VLAN ultra long packet transmission
Support QoS to ensure the transmission of VOIP packets
Support STP spanning trees to form redundant networks
Applicable to10/100/1000Mbps Gigabit Optical Ethernet Long Distance Transmission Network
| Technical Specifications | parameter description |
| transmission mode | Full/Half Duplex, 10/100/1000Mbps |
| transmission method | store and forward |
| Maximum filtration speed | 1488000pps（1000M） |
| Ethernet electrical interface | |
| number of interfaces | 1 |
| protocol standard | IEEE802.3、IEEE802.3u、IEEE802.3ab |
| rate | 10M/100M/1000Mbps adaptive |
| Duplex mode | Full/Half Duplex |
| connection method | Network cable crossover/direct connection adaptive |
| transmission distance | Category 5 twisted pair cable: 100m |
| interface type | RJ45 port |
| Ethernet optical interface | |
| number of interfaces | 1 |
| protocol standard | IEEE802.3、IEEE802.3z |
| rate | 1000Mbps |
| wavelength | 850nm/1310nm/1550nm |
| Transmitting optical power |
 Dual fiber multi-mode bidirectional: maximum -3ddB, minimum -9.5dBmDual fiber single-mode bidirectional: maximum+3ddB, minimum -11.5dBmSingle fiber single-mode bidirectional: maximum 5dBm, minimum -6dBm |
| transmission distance |
Dual fiber multimode: 550mDual fiber single-mode/single fiber single-mode: 20km, 40km, 60km, 80km, 100km |
| interface type | SC interface, single-mode fiber or multi-mode fiber |
| Conventional Parameters | |
| Electrical Characteristics |
Power supply: 220V/AC 165-265V, 50-60Hz; -48V/DC -36～-72VPower consumption:<6W |
| Environmental Requirements |
Working temperature: -5 ° C to 50 ° CStorage temperature: -40 ° C to 70 ° CHumidity range: 5% to 95%, non condensing |
| Overall dimensions |
Desktop product: 156mm (length) x 128mm (width) x 32mm (height)Modular product: 136mm (length) x 98mm (width) x 26mm (height) |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-