Multi link constant temperature magnetic stirring electric heating sleeve product overview:

Multi link magnetic stirring electric heating jacket:
We can produce intelligent multi link magnetic stirring types such as two link, four link, six link and other multi link magnetic (electric heating sleeve) stirrers for you. （100ml，250ml，500ml，1000ml）
Multi connected electric heating sleeve:
The performance and operation are the same as those of a single unit, and can be controlled and regulated separately.
Characteristics of KDM-A-250B Multi link Constant Temperature Magnetic Stirring Electric Heating Sleeve 　　

1. Using an electric heating sleeve for heating, it has the characteristics of large heating area, uniform heating, and fast temperature rise. The highest surface temperature can reach 380 ℃.
2. Heating and stirring can be performed on 50-10000ml standard or non-standard reaction bottles.
3. Adopting a DC brushless motor, it has stable performance, low noise, long service life, and no spark generation.
4. The shell is formed in one go, with high temperature resistance, corrosion resistance, and good insulation performance.
The 5.30 ° inclined control panel is suitable for both sitting and standing perspectives.
6. Infinite speed regulation, smooth at low speeds, and strong at high speeds.
7. Built in electronic voltage regulation circuit, controlled by thyristor.
　　KDM-A-250B Multi link Constant Temperature Magnetic Stirring Electric Heating SleeveInstructions for use

1. Fix the upright pole in the screw hole above and behind the mixer, adjust the height of the cross clamp, use a universal clamp to fix the reaction bottle, put in a suitable mixer, insert the power supply~220 ∨, and turn on the switch.
2. Adjust the "mixing" knob clockwise and adjust it to the appropriate position according to the speed display for mixing.
When stirring large or viscous solutions, the knob can be adjusted appropriately to increase the stirring force.
4. Adjust the temperature control knob clockwise and adjust it to the appropriate position for heating and stirring as needed.
5. When displaying temperature, a glass thermometer or digital thermometer can be used for auxiliary measurement.
　　KDM-A-250BPrecautions

To ensure safe use, please ensure the grounding wire is connected.
2. In order to extend the use of the product, all motors of the magnetic stirrer are equipped with fan cooling function. Therefore, when conducting heating experiments, especially high-temperature heating tests, the instrument cannot be used solely for heating. It is necessary to adjust the motor to rotate or rotate at a medium speed (or idle) to prevent damage to the motor and electrical appliances caused by high-temperature radiation. If the motor cannot start and rotate, it should be repaired by the dealer in a timely manner. Otherwise, failure to operate according to the requirements and causing damage or loss will not be held responsible.
3. The heating part has a high temperature, so be careful when working to avoid burns.
4. In case of wet hands, liquid spillage, or long-term exposure to high humidity conditions causing electrical leakage, it should be dried or naturally dried before use to avoid danger.
5. It is normal for white smoke and odor to emerge from the sleeve during repeated use, and for the color to change from white to brown and then back to white. Due to the presence of oil and other compounds in the production process of fiberglass, it should be placed in a well ventilated area and can be used normally after a few minutes of disappearance.
When using an electric heating sleeve with a capacity of over 63000ml, there may be a creaking sound due to differences in the furnace wire structure and related to the controllable silicon voltage pulse signal. You can use it with confidence.
7. When liquid overflows into the sleeve, please quickly turn off the power and place the electric heating sleeve in a ventilated place until it is dry before use to avoid the danger of electric leakage or electrical short circuit.
When not in use for a long time, please store the electric heating sleeve in a dry and non corrosive gas place.
9. Please do not use empty heating or dry burning.
When the environmental humidity is relatively high, there may be induced electricity transmitted through the insulation layer to the shell. Please ground the wire to avoid leakage and pay attention to ventilation.
11. Relative humidity: 35% -85% (without condensation).
12. Insurance managementΦ5×20 15A。
If there are any differences in the content of this manual due to improvements made to the product or the products mentioned in this manual, no further notice will be given.