Multi link digital display constant temperature electric heating sleeve product overview:

OneKDMA seriesMulti connected digital display constant temperature electric heating sleeveProduct Introduction

The digital constant temperature electric heating set is widely used for sample baking, drying, and other temperature tests. The heating power is 200W, 400W, 600W, and 800W according to the capacity. High efficiency insulation and energy-saving materials are used as fillers, which can quickly achieve temperature control and heat up to over 200 ℃; This machine is easy to operate and safe to use, making it an essential tool for biology, genetics, medicine and health, environmental protection, biochemical laboratories, analysis rooms, education and scientific research.

II KDMA seriesMulti connected digital display constant temperature electric heating sleeveTECHNICAL INDEX

IIIKDMA seriesSafety instructions before use
1. Please read the instruction manual carefully before use.
2. The electrical rated parameters of the power socket provided by the user should be greater than the electrical rated parameters of the machine, and there should be good grounding measures.
3. Before replacing the fuse, ensure that the power supply has been cut off.
4. It is strictly prohibited to move the machine during normal operation.
5. Do not allow children to approach or enter the machine cavity to prevent accidents.
6. It is strictly prohibited for objects to collide with the machine.
7. Do not use in places with high temperatures and direct sunlight.
8. If any abnormal situation is found, the machine should be immediately shut down and the power should be cut off.

4KDMA seriesinstructions
1. Clean the exterior of the container containing the test sample and place it in an electric heating jacket.
2. Connect the power supply, turn on the power switch, and once the indicator light is on, set the desired temperature on the intelligent temperature controller.
3. After completing the work, cut off the power and place the temperature control knob and speed control knob in the lowest position.
4. Clean the machine.