Mini constant temperature and humidity test chamber

Mini constant temperature and humidity test chamberPurpose:

Adopting a human-machine interface temperature and humidity controller with reliable performance, easy operation, and significantly superior control technology compared to similar imported equipment, it is an ideal device for conducting alternating humidity and heat tests. Test the heat resistance, cold resistance, dry resistance, and moisture resistance of various materials. Suitable for use in factories such as electronics, electronics, food, vehicles, metals, chemicals, and building materials. Can meet the following standards:GB2423.1-89Low temperature test methodGB2423.2-89High temperature test methodGB2423-93experimentD6Alternating damp heat test methodIEC68-2-30Experimental method.

Product Model:DB-TH-S-64G

Structure and components:

1.Material of inner and outer boxes:

inner box:mirror finish

outer box:Stainless steel or steel plate spraying

2.Insulation material:Hard polyurethane foam+glass wool

3.controller:JapanOYOOr KoreaTEMIHuman machine interface touch screen controller

4.Freezing system:French Taikang fully enclosed compressor/Environmentally friendly refrigerant

5.protective device:Compressor overheating,overcurrent,overpressure,Heating, humidification, and air burning,Overheating inside the box,Water shortage alarm system

6.power supply:220VAC±10%

7.Standard Configuration:Observation window (interior lighting), diameter50mmOne cable hole (located on the left side) and two sets of sample racks (adjustable height)

main components:Communication interface, recorder, built-in glass door, and operating hole

Product Parameters:

1.Temperature and humidity sensor: PT100Dry wet bulb sensor

2.Temperature and humidity range:temperature:- 20 ~ +150

humidity30% ~ 98%RH

3.temperature fluctuation:±0.5degree

4.Humidity fluctuation:±1%RH

5.Humidity uniformity:±2degree

6.warm-up time: -20 ~ +150Degree less than60minute

7.cooling time: +20 ~ -20Degree less than45minute

8.Product volume（L）:64

9.Internal dimensions（H*W*D）cm： 40 * 40 * 40 can also achieve 30 * 30 * 30

10.Temperature regulation method:BTHCMethod (Balanced Temperature and Humidity Adjustment Method)

11.Working environment temperature: +5~+35degree

12.heater:Nickel chromium alloy electric wire heater

13.humidifier:Shallow groove heating humidifier