VIP member
Microwave signal generator YM1125
The YM1125 microwave signal generator is a synthetic signal source specially designed for microwave laboratories in universities. Its operating freque
Product details
YM1125 Microwave Signal Generator
One; summary
YM1125 MicrowaveThe signal generator is a synthetic signal source specifically designed for microwave laboratories in universities,Its operating frequency range is8GHZ～12GHZ；YM1125 MicrowaveSignal generatorThe operating frequency, output level, and operating mode of the signal source are displayed on the screen. The signal source operates stably and is easy to operate.YM1125 MicrowaveSignal generatorIt is also applicable to other microwave equipment operating within this frequency range, used as a standard signal source.The YM1125 microwave signal generator completely replaces the original YM1123 microwave signal source.
2、 Technical parameters
OneWorking frequency:8GHz～12GHz
SecondlyFrequency adjustment resolution:10MHZ(100MHzStepping/Return)
ThreeFrequency regulation accuracy10-4
Four-5Frequency stability: 2 × 10
/Hour by hour
Five
Output level: ≥ 5mW
Six
Output level adjustment range:> 20dB
Seven
Working mode: a continuous wave (CW) b, 1000Hz square wave modulation
Eight
Distortion: Harmonic or non harmonic distortion ≤ -20dB
Nine
Phase noise ≤ -60dB/Hz
Ten
Output connector: Coaxial N-K (50 Ω)
Eleven
Power supply: 220V AC
|
Twelve Dimensions: 350 × 220 × 100 (mm) Thirteen Weight: 3.5Kg |
||
|
3、 Usage and operation methods 1. |
Connect the power supply, press the power switch, the signal source starts working, and the panel display screen shows the current working frequency, working mode, and output level. 2. |
Adjust the working frequency knob and indicate the frequency of the output signal according to the displayed value. (Lightly press the adjustment knob and rotate it in the forward direction to step forward/backward at 10MHz and 100MHz, respectively) 3. |
|
Operate the working mode button switch to display two working modes: continuous wave and square wave (with a repetition rate of 1KHZ).4. |
Adjust the output level knob to achieve the desired signal operating level. |
1 |
|
4、 Packing List |
pretend |
1 |
|
boxclear |
single |
1 |
|
name |
call |
1 |
|
single |
position |
1 |
numberamountYM1125Signal source hostplatformpower cordrootOutput cableN-JJrootProduct Qualification CertificateZhangProduct manualshareRelated products:YS-2499A（
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-