BQF-200Flat supersonic airflow crusher

working principle:

The material is sucked into the crushing chamber by the negative pressure generated by the high-speed airflow in the small hopper,There are several nozzles on the periphery of the crushing chamberAt the tangent angleSpray supersonic into the crushing chamberHigh-pressure airflowMake the particles entering the crushing chamber undergo intense reactionsIt is crushed by self collision and collision with the inner wall. The fine particles obtained from crushing leave the crushing chamber through the discharge port under the influence of airflow, while the coarse particles continue to be crushed under the action of the central tube.

Performance characteristics:

1. Suitable for dry ultrafine process, due to its high impact speed, it can reach2Above Mach, it is generally easy to obtain1-10Micron particles.

2. Due to the intense occurrence of particlesMaterials with strong fibrous properties perform well in terms of self collision and collision with inner walls.

3. The crushing process uses high-speed and low-temperature gas,And there is no mechanical friction process, so the crushing process will not heat up，Therefore, it is suitable for the crushing of low melting point, heat sensitive materials, and also plays a role in mixing and dispersing during the crushing process.

4. This device has the advantages of short crushing time, simple structure, no moving parts, easy operation and maintenance, small footprint, low noise and no vibration.

5. High crushing efficiency,By using clean air for crushing and ceramic lining on the inner wall, high-purity materials can be obtained.

useRange:

shoulddeviceUltra fine grinding of materials used in industries such as pharmaceuticals, traditional Chinese medicine, chemical engineering, metallurgy, etcSuch as nifedipine, nifedipine, Chinese herbal medicine, dyes, pigments, etc.

Suitable for small and medium-sized production, it is very convenient for traditional Chinese medicine production, Western medicine processing, etc.

1) Small footprint.

2) Mobile convenience.

3) Easy to clean.

4) The required height of the equipment can be applied to the vast majority of factories and sites (ordinary laboratories with a height of about 3 meters can also be used normally).

Technical parameters: