CHY-II-17/16 Material Load Softening Temperature TesterMain technical parameters (two options: differential method and non differential method):

1. Heating temperature: up to 1650 ℃; 1750 ℃ (two options available)

Corresponding operating temperatures: 1600 ℃, 1700 ℃, temperature control accuracy: the heating section can reach: less than ± 2 ℃.

2. Heating rate: 0-20 ℃/minute; Can be set arbitrarily

3. Heating method: manual or automatic program heating; 30 segments of program temperature rise or above

4. Deformation measurement range (mm): 0-10, deformation measurement indication error: not greater than 0.03mm;

5. Sample size: height 50 ± 0.5mm; Diameter 36 ± 0.15mm;

Or a height of 50 ± 0.5mm; Diameter 50 ± 0.35mm;

6. The height of the uniform temperature zone shall not be less than 75mm; The temperature difference shall not exceed 20 ℃;

7. Maximum power: 3.5KW to 6KW;

8. Sample load pressure: 0.2Mpa; 0.1Mpa, etc

9. The pressurization method can choose direct pressure digital display, and the loading range (N) is: 100-1000, up to 1N force.

10. The furnace body adopts an open type furnace body, making it very convenient to replace the upper and lower pressure rods. The independent loading system ensures higher loading accuracy.

11. It can be connected to a computer to achieve fully automatic control, with a Chinese operating interface and automatic printing of test reports.