|
Product Name
|
Mold test chamber/Mold alternating test chamber(Alternating mould test chamber)
|
|
Product Usage
|
Mold testing chamber is suitable forbigSpecialized colleges, pharmaceuticals, electronics, chemical engineering, and biological research departments are required to store bacterial strains, cultivate biological organisms, and are essential equipment for research laboratories. This product is cultivated under certain temperature and humidity conditionstrueBacteria are used to test the antibacterial aging ability of products
|
|
Box Structure
|
Mold test box bodypickProcessing and shaping with CNC machine toolsbeautyElegant in appearance and equipped with non reactive handles, easy to operate.
The inner liner of the box is made of imported high-grade stainless steel (SUS304) mirror panel, and the outer liner of the box is made of A3 steel plate spray painted, which increases the appearance texture and cleanliness.
The water replenishment tank is placed incontrolThe lower right part of the box is equipped with automatic water shortage protection, making it more convenient for operators to replenish water sources.
Large observation window with lighting to keep the box bright, and embedded with a heating element inside the bodysteelGlaze and observe the condition inside the box clearly at any time.
Mold Test Chamber Humidification System Pipeline and Control Circuit Board DivisionopenIt can prevent malfunctions caused by water leakage in the humidification pipeline and improve safety.
The waterway system, pipeline, and circuit system use doorsformulaOpen for easy maintenance and inspectionrepair.
The insulation of the box is made of ultra-fine fiber insulation cotton, which can avoid unnecessary energy loss.
Left side of the boxsideEquipped with a 50mm diameter test hole, it can be used for external testing power or signal lines.
|
|
refrigeration system
|
The refrigeration unit adopts the original French "Taikang" fully enclosed compressor.
The refrigeration system adopts unitsexceptWet system design.
Adopting a multi wing air supply fan for strong air circulation, avoiding any dead corners, can make the temperature and humidity distribution in the testing area uniform.
windroadThe design of circulating air outlet and return air ensures that the wind pressure and speed meet the testing standards and can open the doorinstantThe temperature and humidity stabilize quickly.
The heating, cooling, and humidification systems are fully operationalaloneIt can improve efficiency, reduce testing costs, extend lifespan, and decrease failure rates.
|
|
meet the standard
|
GB/T10588-2002
|
|
product image
|
|
|
|
|
model
|
（J）MS-100
|
（J）MS-225
|
（J）MS-500
|
（J）MS-010
|
|
Working dimensions D × W × H
|
450×450×500
|
500×600×750
|
700×800×900
|
1000×1000×1000
|
|
Dimensions D × W × H
|
1150×900×1650
|
1200×1100×1900
|
1350×1280×2100
|
1650×1480×2200
|
|
power
|
3.8KW
|
4.5kw
|
5.3kw
|
7.5kw
|
|
performance metrics
|
temperature range
|
20℃～80℃
|
|
humidity range
|
45～98％RH
|
|
Fluctuations/Uniformity
|
±0.5℃/±2℃
|
|
Humidity deviation
|
＋2、－3％RH
|
|
warm-up time
|
20℃～80℃about30min
|
|
cooling time
|
80 ℃~20 ℃ for about 30 minutes
|
|
Temperature and humidity operation control system
|
controller
|
enterProgrammable touch LCD Chinese dialogue/microcomputer integrated temperature and humidity controller
|
|
Dehumidification system
|
Adopting evaporator coil dew point temperature laminar contact dehumidification method
|
|
water supply system
|
The humidification water supply adopts automatic control And it can recycle residual water Water conservation and consumption reduction
|
|
water production system
|
Fully enclosed air-cooled single-stage compression refrigeration method/originalInstall the French "Taikang" compressor
|
|
Note: 1 “MS”ForMold Test Chambermodel; JMS isAlternating mold test chamber
2. The above data are all at an ambient temperature (QT) of 25 ℃ Measured under no-load conditions in the studio
This technical information is subject to change without prior notice
|
|
|
