VIP member
MGS-1411-H01 Magnetic Guidance Sensor
MGS-1411-H01 Magnetic Guidance Sensor
Product details
1： Overview:
Our company has independently developed the MGS-H01, which is a magnetic guidance sensor (also known as a magnetic navigation sensor) for magnetic track guided unmanned AGV vehicles. It is an upgraded product of our MGS-R01. The AGV car with track navigation type unmanned driving travels on a track with magnetic strips. The MGS-H01 magnetic guidance sensor inputs the voltage signal of the car deviating from the track to the car controller. It is installed at the lower part of the AGV car body, away from the track surface (5-30mm), with a track width of 50 mm and a thickness of 1.2 mm. The guidance sensor senses the magnetic field strength of the track to obtain the offset between the car and the track. After processing by the signal processor, it outputs an analog voltage signal proportional to the offset. After receiving the signal, the car controller will automatically make adjustments to ensure that the AGV car travels along the magnetic track.
2： Main parameters of MGS-H01 magnetic navigation sensor:
project |
parameter |
Remarks |
Specification |
MGS-H—V-20-2000 |
|
Product Code |
MGS-H01 |
|
Main material |
aluminum alloy |
|
power supply voltage |
15-24VDC |
|
Load current (door switch) |
100ｍ Ａ max |
|
output type |
analog quantity |
|
sensing distance |
5-30mm |
|
measurement range |
±100mm |
|
Output mode (door switch) |
NPN collector open circuit output |
|
signal amplitude |
2.66±0.2V---7.3±0.2V |
Main road selection output |
3.33±0.2V---8±0.2V |
Left branch selection output |
|
2±0.2V---6.7±0.2V |
Select output for the right branch channel |
|
Protection type |
Polarity reversal and short circuit protection |
|
insulation resistance |
50M min |
|
electrical connection |
RVVP 6×0.2×2000 |
Six core shielded sheathed wire |
tensile strength |
5kg |
Between the wire and the shell |
service life |
3 years |
|
ambient temperature |
0—75℃ |
|
humidity |
90% max |
|
mechanical vibration |
7g |
F=20-400Hz, in each direction |
mechanical shock |
10g/16ms |
1000 times, in each direction |
Protection level |
IP65 |
|
esd protection |
4.5KV |
|
Electric field interference |
200V/m |
|
Installation and Usage |
Adapt to magnetic strips |
50 × 3, with a field strength of not less than 60Gs at a height of 30mm from the center line of the magnetic stripe |
Installation direction |
Align the centerline of the sensor with the centerline of the magnetic stripe |
|
Application field |
Automated Guided Vehicle (AGV) |
|
Trackless mobile shelves, logistics picking and other industries |
||
Automatic Handcart AGC |
3： Outline dimension diagram
Wiring Diagram
4： Product images
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-