product description
MD-S800 seriesThe digital pressure controller is an electronic pressure switch that integrates pressure measurement, display, and control into a multifunctional intelligent switch. When the pressure reaches the predetermined value, a control signal is output to turn on or off the controlled equipment, achieving the purpose of automation control. It can be used as a liquid level controller and hydraulic pressure switch.
This series of switches has the advantages of high precision, low hysteresis, fast response, stable and reliable performance, easy operation, and simple and flexible installation. It is a high-tech product using microcomputer technology for pressure automatic control.
☆Easy wiring installation: Only one contactor is needed to control the start and stop of the power supply
☆Three pressure units (Mpa, Bar, PSI) are available for switching (micro pressure kPa unit)
☆Real time display of pressure, equipped with an intelligent self diagnostic system to provide prompts for error types
☆Equipped with one click reset function
☆The upper and lower limit control points are adjustable across the entire range, and the adjustment method is simple
|
Pressure range |
0~0.1...0.25/0.4/0.6/1/1.6/2.5/4/6/10/25/40/60/100/160Mpa |
Micro pressure range |
0~5kPa...10...25...50...100kPa |
accuracy class |
1%FS |
Power supply |
24VDC, 220VAC, 380VA optional |
Alarm point setting |
Any alarm point can be set within the full range |
output signal |
Relay switch signal |
Load capacity |
220VAC5A ; 24VDC3A |
Sample Rate |
5 times/second |
Usage temperature |
-20℃~70℃ |
Measurement medium |
316L stainless steel compatible media such as water, gas, oil, etc |
Wiring protection |
Reverse polarity and short circuit protection |
Installation interface |
M20 * 1.5 G1/2 G1/4 optional |
Definition of outgoing line |
Power cord: red blue output cable: black and white |

Standard configuration: Product user manual, product certificate, outer packaging box
