Loosening shovel quick change connector:

The loosening shovel quick change joint system has created a universal installation system that can be used on almost any machine. With just one bracket and spring clip installed, you can work in over 100 different cultivators and spikes without the need for an additional nut or bolt.

With the emergence of quick change joints for soil shovels, installation has become increasingly simple. Firstly, use two bolts to secure the quick connector bracket to the rack, just like a traditional bulldozer, and then fix the spring in the fixed position. Next, install the shrapnel onto the bracket.

Once the soil shovel is loosened, gently tap the tip of the shovel with a hammer, while using another hammer to support the top of the bracket to prevent the shrapnel from the handle from moving. Continue tapping until the circular button that holds the shrapnel pops out of the hole on the scanning handle.

Remove the soil scraper and gently tap the surface of the sweeping handle to release the tension on the protective ring spring.