VIP member
Product details
Specification Table
| model | unit | SUA-250L | ||
|---|---|---|---|---|
| Disk diameter | mm | Ø250 | ||
| Diameter of the central hole on the disc surface | mm | Ø40H7 | ||
| Central hole penetration diameter | mm | Ø40 | ||
| Center height (for vertical use) | mm | 160 | ||
| Bottom to disk height (for horizontal use) | mm | 153 | ||
| Width of T-shaped groove on the surface | mm | 12H7 | ||
| Bottom key width | mm | 18h7(14h7) | ||
| Minimum set angle | deg. | 0.001 | ||
| Segmentation accuracy | sec. | 20 | ||
| Repetitive accuracy | sec. | 4 | ||
| Locking torque | Air pressure 5~7kg/cm ² | N.m | 300 | |
| Oil pressure 20~30kg/cm ² | N.m | 500 | ||
| Servo motor model | FANUC | - | α4i / ß8is | |
| Mitsubishi | - | HF-154T | ||
| Gear ratio | - | 1 : 90 | ||
| Maximum disk speed (calculated based on FANUC α motor) | rpm | 44.4 | ||
| Allowable load capacity | vertical | kg | 100 | |
| horizontal type | kg | 180 | ||
| Use the tailstock | kg | 180 | ||
| Allowable cutting force | F | N | 16000 | |
| FxL | N.m | 1120 | ||
| FxL | N.m | 700 | ||
| Turbine allowable torque | N.m | 260 | ||
| Permissible consistency | J=W.D²/8 | kg.m² | 0.62 | |
| Turntable weight (excluding motor) | kg | 59 | ||
*Our company reserves the right to change product specifications, dimensions, and design features without prior notice.
Appearance dimension diagram
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-