DRX-II-JG-1000 laser thermal conductivity meterMainly tests the thermal conductivity of thin conductors, solid electrical insulation materials, granular materials, powdered materials, and coal. Compliant with GJB 1201.1-91, ASTMD 1461 Solid Materials, Thermal Conductive Resins, Thermal Conductive Fiberglass, etc.

Main technical parameters of DRX-II-JG-1000 laser thermal conductivity meter:

1. Temperature range: Room temperature to 300 ℃;

2. Thermal conductivity testing range: 0.1-1000W/mK, with a thermal conductivity of 0.1 W/mK;

3. Sample testing range: Square not less than 10 × 10mm, circular not less than φ 20, thickness 0.01~5mm;

4. Test sample types: solid block, low viscosity liquid, high viscosity liquid, solid powder, viscous semi-solid, elastic solid, film, etc. can all be adapted;

5. Equipped with an automatic sampler, with no less than 3 sample grades;

6. Multiple mathematical models can be fitted to perform heat loss related corrections;

7. Can achieve two modes of vacuum measurement and protective atmosphere measurement;

8. Multi layer analysis can be conducted, and parameters such as thermal resistance and thermal diffusion rate can be calculated.

9. It can be connected to a computer to achieve fully automatic control, with a Chinese operating interface and automatic printing of test reports; mso? Vs-H? ? O? Ly: 'Times New Roman'>Deformation test range: 0-5mm, accuracy: 0.1%, resolution: 1um/dig, 0.1um/dig..

7. Fully automatic analysis software, tested and analyzed online by industrial PC.