HH-W600SLarge capacity three purpose constant temperature water tankIt consists of a box, inner liner, panel, shelf, electric heating tube, and intelligent digital temperature controller. The temperature control is manufactured using microcomputer intelligent digital technology and has industrial PID self-tuning and LED window indication functions.

Main technical indicators:

1. Temperature control range: Room temperature -99.9 ℃

2. Temperature resolution: 0.1℃

3. Temperature uniformity: ±0.5℃

4. Rated power: 2.0（KW）

5. Studio size: 60×30×20（cm）

6. Dimensions: 75×40×43（cm）

7. Packaging size: 81×51×53（cm）

8. Net weight/gross weight: 19（Kg）

9. Power supply: 220V±10% / 50HZ+2%

HH-W600SLarge capacity three purpose constant temperature water tankProduct features:

1. The temperature controller is a digital display, PID self-tuning temperature controller.

On the right side of the water tank is an electrical box. The front panel of the electrical box is equipped with temperature control instruments and power switches. Inside the electrical box, there are electric heating tubes and sensors.

3. High temperature control accuracy, strong anti-interference ability, and easy operation.

4. The temperature control system adopts a reliable regulating control device with strong heat sensitivity and high sensitivity, which can be adjusted freely within the range of use.

5. This series of sinks adopts SUS304 folding and welding, and the shell is formed by stamping, folding, and welding steel plates.

6. The electric heating tube is made of U-shaped steel pipe, which is installed in the middle of water and directly immersed in water, resulting in less heat loss.

7. The surface of the shell is coated with electrostatic spraying, and the paint film is smooth and firm.

Maintenance and upkeep:

1. Do not add too much water to the pot to prevent it from overflowing when boiling.

2. The inner surface of the equipment should be free of water droplets, and the outer surface of the equipment should be bright, clean, and free of stains.

3. When using a water bath, it must be reliably grounded and water must not overflow into the control box.

4. Do not leave water in the water bath or keep the water level below the electric heating tube to prevent it from bursting or damaging.

5. Clean the instrument immediately after each use.

6. Drain the water from the water bath, use a brush to gently remove coarse debris from the water bath, and clean the inside of the pot. Wipe the inner and outer surfaces of the water bath with a soft cloth, and then wipe dry with a cleaning cloth.

7. This product uses a 220V AC power supply, and the power socket should use a three hole safety socket, which must be properly grounded.

Changzhou Gaode Instrument Manufacturing Co., Ltd. is a professional laboratory equipment manufacturer and a technology-based enterprise that integrates design, production, sales, and service. Strive to achieve perfection and serve people from all walks of life wholeheartedly throughout the entire process. Thank you for your attention! Welcome to inquire.