1、 Equipment Overview:
*This machine is suitable for mixing, plasticizing, and extrusion processing experiments of engineering plastics, modified plastics, and color masterbatch. It has functions such as plasticizing homogenization, coloring and sampling, and filling modification.
*Specially manufactured screws and barrels with high processing accuracy and quality assurance
*Brand motor drive, stable and reliable screw speed control
*The material with adjustable particle size and thickness is fully plasticized and mixed in the screw.
*This product uses household 220V voltage, adjustable extrusion speed, and extrusion temperature can be set arbitrarily between room temperature and 400 degrees.
*The height of the extrusion center is 300MM, and the maximum output for ABS material is around 0.8KG-3KG per hour.
*This machine is a twin-screw extruder
2、 Application scope of laboratory small single screw extruder:
*Melting, plasticizing, and extrusion of materials
*Optimization of extrusion molding process parameters
*Establish small-scale experimental lines for films, sheets, pipes, granulation, etc
3、 Machine principle
The principle of this machine is to feed plastic particle raw materials into a hopper, melt them through a screw heating zone, rotate and extrude them, and use an extrusion hole mold to squeeze out the melted plastic. Then, other auxiliary processes such as cooling, traction, and winding are used to make the required product size.

4、 Technical parameters:
1. Screw diameter: 30mm for large head and 15mm for small head,
2. Design output: 0.1-3KG/h; ,
3. Machine size, 0.8 * 0.2 * 0.5m
4. Weight after wooden box packaging: 40KG
5. Extrusion center height: 300mm;
6. Extrusion direction: right → left exit
7. Motor power; 400w
8. Power supply voltage: Typically 220V single-phase household voltage, but can also be adjusted according to customer voltage;
9. Screw aspect ratio: 16:1
10. Heating temperature up to 400 degrees, heating element: stainless steel heating (in addition, our company also provides customized high-temperature models, with a maximum temperature of 500 degrees)
10. The discharge port is equipped with a cooling device (to prevent the temperature of the discharge port from being too high, causing premature melting of the material and resulting in blockage)
11. Barrel screw 38CR nitriding treatment
12. Cooling water tank length: 500MM, water pump power 3W
13. Granulator size: 500 * 500 * 400, 30KG, variable frequency speed regulation, motor power 370W, 220V household electricity.