Main technical parameters of LM-85/40 experimental mill

Appearance (length x width x height): 724mm x 510mm x 560mm

*Grinding roller specification (diameter x length): D85mm x 40mm

Rated output: ≤ 500g/time

Electric motor power: 0.55 kw × 2

Working power supply: 380V

Powder yield: ≥ 65%

Sample recovery rate: ≥ 98%

*Repetitive test accuracy: ± 1.5% (same sample)

*There are independent skin grinding and heart grinding systems, with the skin grinding being a toothed roller and the heart grinding being a sandblasting roller

*Verified and determined the applicability of standards by the National Grain Administration Standard Quality Center.

When the device is working normally, the noise measured at a distance of approximately 1 meter around the device is below 70db.

According to GB/T 5507-2008 "Grain and oil inspection - Determination of fineness of powders", it is required that all pass CB36 and pass CB42 ≥ 90%.