LHN slide module heavy-duty series product description
LHN overloadSliding table moduleThe series linear positioning unit consists of a square aluminum profile equipped with a heavy-duty linear sliding rail unit and a sliding table, and performs linear motion under the drive of a synchronous belt. The synchronous wheel mechanism at both ends of the profile uses maintenance free ball bearings, and the bearing installation holes are formed in one go, reducing maintenance difficulty and improving reliability. The tension of the belt can be adjusted by a simple device installed on the slide table.

LHN slide module heavy-duty series selection parameters
● Travel: Customizable according to needs, with a maximum length of 5700mm for a single piece and the ability to connect multiple pieces.
Installation method of slide mechanism: Install other mechanisms through the screw holes on the slide.
● Linear unit installation method: Fix the linear unit through T-slots or screw holes, or use LHN installation accessories.
● Synchronous belt model: S5M synchronous belt reinforced with steel wire, without buffering during reversing, with a repeat positioning accuracy of 0.1mm.
Induction switch installation: No other installation accessories are required, supporting direct connection between induction switches and module profiles, and can adapt to photoelectric switches (672) and proximity switches (TL-W3MC1).

Motor installation: It can adapt to the installation of stepper motors of various brands such as 42, 57, 86, as well as servo motors of 100W, 200W, 400W, 750W, etc. Support direct connection between motors and modules to reduce the space occupied by motor installation.

About LHN European standard slide module heavy-duty series productsPlease contact us for selection and drawings - Dongguan Navigation Automation