LAF type clean laminar flow hood is an air purification unit that can provide a locally clean environment. It can be flexibly installed above process points that require high cleanliness. The laminar flow hood can be used individually or combined into a belt shaped clean area. It can be flexibly suspended from the ceiling or moved and supported, meeting the requirements of local cleanliness.

LAF type clean laminar flow hoodWidely used in clean air treatment environments such as precision electronic device operation rooms and pharmaceutical workshops, antibiotic bottle washing, drying, filling and sealing production lines, oral liquid bottle washing, drying, filling and sealing production lines, and large infusion production lines. The fan adopts high-quality centrifugal fan, which has the characteristics of long life, low noise, maintenance free, low vibration, and stepless speed regulation. The quality of the fan is reliable, and the working life is up to 100000 hours or more.

The LAF clean laminar flow hood adopts a vertical unidirectional airflow form, and the air supply first needs to be pre filtered through a primary filter to remove large dust particles in the airflow,. After pre-processing, the air is further filtered through a high-efficiency filter to provide sufficient protection for the filter. Under the pressure provided by the centrifugal fan, it is filtered through a high-efficiency filter to meet the cleanliness requirements. This ensures that the cleanliness of the work area meets the process requirements.

Set wind speed: When the fan is not started, press and hold the set button for 3-5 seconds, and the digital display will show the wind speed. Then press the up and down buttons to adjust the wind speed. After adjusting, just don't press any buttons.

Set voltage: When the fan is started and the digital display shows the gear, hold down the set button until the current gear voltage is displayed on the digital display, then press the up and down buttons (while holding down the set button) to adjust the voltage. After adjusting, press no buttons to return to the previous gear (usually starting from gear 3)