Overview:
The KP650 series input static pressure liquid level transmitter is composed of a diffusion silicon sensor, a ceramic capacitive sensor, an air conducting cable, a stainless steel cylinder, etc Measure the liquid level height by measuring the pressure at the location of the sensor, and convert the liquid level height into a standard electrical signal output. Stable performance, good reliability, long service life, and internal circuit design that meets intrinsic safety and explosion-proof requirements. Its excellent performance can completely replace imported input (or submersible) static liquid level transmitters, mainly used to measure the liquid level height or depth of water, oil, etc.
Technical Specifications
Basic error: 0.5% F • S
Measurement range: 0~0.5 meters and above
■ Linearity: better than 0.2% F • S
■ Temperature drift:<± 0.03% F • S/℃
Long term stability:<0.5F • S/year
Response time: ≤ 10mS
■ Power supply: 24VDC
Output: 4~20mA
■ Load resistance: 0~600 Ω
■ Operating environment temperature: -20~85 ℃
■ Temperature of the tested medium: -10~60 ℃
Storage temperature: -45~+125 ℃
■ Installation test: directly put into the bottom of the liquid
■ Sensor housing material: 1Cr18Ni9ti or PTFE
■ Sensor isolation diaphragm material: 316L stainless steel
■ Material of conduit cable jacket: polyethylene or customized
Power consumption:<0.5W (24VDC)

For more detailed information, please click to view[KP650.pdf]