VIP member
KF-6901M multi-channel partial discharge pulse signal source
Product Description: KF-6901M Multi channel Partial Discharge Pulse Signal Source is a high-performance, cost-effective, and multifunctional signal so
Product details
The KF-6901M multi-channel partial discharge pulse signal source is a high-performance, cost-effective, and multifunctional signal source that can simulate bipolar single pulse partial discharge signals. The rich shortcut keys greatly simplify the complex operation process and greatly enhance the operability of the instrument. Users do not need to spend a lot of time learning and familiarizing themselves with the operation of the instrument, and can proficiently use it. Widely used in fields such as power systems, scientific research institutions, and high-tech enterprises.
The instrument adopts DDS direct digital synthesis technology to generate accurate, stable, and low distortion output signals, and all parameters are calibrated by internal programs; Standard upper computer software is available, and all functions of the instrument can be controlled using the upper computer software. The upper computer software can also be used to edit any waveform and save it to the signal source for output waveform; Large scale integrated circuits, surface mount technology, high reliability, long service life; Equipped with output short-circuit protection, all signal output terminals can operate for 60 seconds under load short-circuit conditions.
Technical Specifications
1 |
Simulate partial discharge signal waveform types |
Bipolar single pulse waveform |
2 |
Output signal range |
0~12000mVpp (1pC is equivalent to 1 mVpp); See screenshot of the inspection report on the next page |
3 |
Pulse density range |
1000pps (number of pulses per second) |
4 |
Basic functions |
Partial discharge signal simulation generator, with adjustable basic parameters such as phase, pulse repetition rate, amplitude, etc |
5 |
Partial discharge type |
Can simulate various types of discharges, including internal discharge, surface discharge, corona discharge, etc; Stackable noise test |
6 |
signal output |
Can output a single signal or a superimposed signal |
7 |
Graph Library |
Editable, customizable for saving, with over 10 standard graph libraries available, and customizable for adding |
8 |
Types of noise interference |
Simulate various types of interference, including but not limited to white noise, fluorescent power frequency interference, mobile phone interference, motor interference, radar interference, etc. |
9 |
Number of noise interference signal channels |
Independent 3-channel |
10 |
Number of partial discharge signal channels |
Independent 3-channel |
11 |
Phase synchronization method |
Internal synchronization, external synchronization |
15 |
Signal output function |
Can test sensors for cables such as HFCT and RFCT, and can be directly injected into cable lines for testing. |
16 |
signal output |
The typical partial discharge type spectrum can be output separately or simultaneously by superimposing noise signals. |
17 |
Adjustable parameters |
The key parameters such as phase distribution, pulse frequency and size, and output initial phase angle can be adjusted. |
18 |
Operation method |
Supports device button operation and also has wireless control function, with a wireless control range of 0-200 meters |
19 |
working power supply |
External power supply: AC 220V, 50 Hz |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-