VIP member
KAMO zero backlash precision gear rack/ring gear
KAMO zero backlash precision gear rack/ring gear adopts a hypocycloid tooth profile for the gear and ring gear, and the meshing gear is transformed in
Product details
Roller&High Precision Rack (CRA type)
The meshing between the rolling pin of the roller and the tooth surface of the rack is rolling meshing, which achieves a light and agile motion transmission from rotation to straight line.
High precision style, with higher precision, load capacity, and reliability.
High precision style, with higher precision, load capacity, and reliability.
Standard length:
1008~1210 is one type of L480
1610-4012 are two types of L500 and L1000.
(However, the lengths of 1610 and 3212 are L512 and L992)
1008~1210 is one type of L480
1610-4012 are two types of L500 and L1000.
(However, the lengths of 1610 and 3212 are L512 and L992)
Roller&Standard Rack (CRE type)
The meshing between the rolling pin of the roller and the tooth surface of the rack is rolling meshing, which achieves a light and agile motion transmission from rotation to straight line.
Standard style, economical and applicable, with higher cost-effectiveness.
Standard style, economical and applicable, with higher cost-effectiveness.
Standard length:
1610-4012 are two types of L500 and L1000.
(However, the lengths of 1610 and 3212 are L512 and L992)
1610-4012 are two types of L500 and L1000.
(However, the lengths of 1610 and 3212 are L512 and L992)
Roller&Integrated Gear Ring (RGF Type)
Provide solutions for precision rotary transmission. A high-precision hollow rotating platform with zero backlash can be designed and manufactured using gear rings.
At present, 7 series of gear rings with diameters ranging from 93-600mm are available on the sample.
The maximum operating torque is 11-5300NM.
The maximum operating torque is 11-5300NM.
Roller&Segmented Ring Gear (RGD Type)
The meshing profile of the segmented ring gear is a cycloid convex tooth. Segmented production is required for large diameters, and only the minimum space is needed to correspond to infinite diameters. Fully engage with the rolling pin of the roller to achieve zero backlash, high-precision, and agile positioning for rotary and swinging movements.
Provide convenience for customers who only require necessary degrees. Segmented gear rings can be spliced together and assembled into gear rings with diameters of tens of meters.
Provide convenience for customers who only require necessary degrees. Segmented gear rings can be spliced together and assembled into gear rings with diameters of tens of meters.
The standard specifications on the sample range from 600mm to 2000mm in diameter,
Both diameters of 100-600mm and diameters above 2000mm can be customized for production.
Special materials, special loads, and special requirements can be negotiated and customized
Both diameters of 100-600mm and diameters above 2000mm can be customized for production.
Special materials, special loads, and special requirements can be negotiated and customized
TCG Ring Gear Component (RGU Type)
Realize a zero backlash hollow rotating platform with high rigidity, high-precision positioning, high speed&low noise, and large diameter (large hollow).
Saves customers design procedures, time, and costs. Provide integrated solutions.
It can be selected for high-precision and precise indexing beyond large reducers, direct drive motors (DD motors), and large dividers.
When customers are under cost pressure, they can consider assembling in their own company,
Only key components such as rollers, gear rings, and reducers can be used.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-