characteristic：

● Fast and uniform halogen lamp heater with innovative SRA technology
Using straight tube halogen lamps and SRA (Secondary Radiation Assistance Device) radiators with * design to shorten measurement time and form a fast and uniform heater.
The use of SHS fast and sensitive weighing sensors enables very few samples to be accurately measured for moisture content.
Using sodium tartrate dihydrate as the standard for checking the accuracy of moisture content measurement
Sodium tartrate dihydrate is a chemical substance with a stable moisture content of 15.66%+0.3/-0.1, making it reliable for temperature testing and providing reference values for measuring instruments.
● Compliant with GLP/GMP/GCP and ISO standards, with date/time, ID， Calibration data and detection record output
Capable of recording and outputting calibration and measurement data to meet quality management and certification requirements.
● Standard RS-232 interface
Bidirectional communication with PC or connection to printer.
Clear and easy to observe large screen fluorescent display
The measurement program, set value, moisture content change rate, measurement status, data number, and other important information are displayed clearly at a glance.

●AND Moisture Meter MF-50 MaintenanceCost guarantee
Users do not need to stop using halogen lamps when replacing them, and the protected chamber is easy to clean (the lifespan of halogen lamps is about 5000 hours)

Five measurement programs:
Standard mode: Measurement is automatically completed by setting high, medium, and low measurement degrees.
Automatic mode: When the moisture content change rate is less than a set ratio, the measurement will automatically end.
Quick mode: In order to achieve rapid measurement, the first 3 minutes after startup are heated at 200 ℃, and then the measurement is completed according to the automatic setting.
Timer mode: Measurement is completed by setting the duration.
Manual mode: operate the measurement process by pressing the start and stop keys.
Four drying procedures
Standard drying: Heat up directly to the set temperature after startup.
Gradual drying: gradually raise the temperature to the set temperature after a preset time.
Step wise drying: Adopt different temperatures in stages according to time.
Quick drying: Heat rapidly at 200 ℃ for 3 minutes and then continue heating according to the set drying temperature.
Any combination of measurement and drying programs can fully meet the measurement requirements of different samples.

Functional parameters: