VIP member
JZX906B low-power NB-IOT module
Frequency band: 800/900MHz Output power: 23dBm ± 2dB Sensitivity: -129dBm Operating voltage DC+2.8V~3.8V Sleep: 3uA Receiver: 50mA Peak value during t
Product details
product overview
The JZX906B embedded NB-IOT low-power three meter module is based on cellular narrowband Internet of Things (Narrowband Internet of Things)
Of Things, NB IoT). The module is built on a cellular network. It is in the field of IoT
An emerging technology that supports low-power devices for cellular data connectivity in wide area networks, also known as low-power wide area networks
(LPWAN)。 NB IoT supports efficient connection of devices with long standby time and high network connectivity requirements. Can provide very
Comprehensive indoor cellular data connection coverage, with advantages such as low power consumption, wide coverage, low cost, and large capacity.
Product Features
Ultra low power consumption, with a current of less than 3uA during sleep mode; powered by batteries of ER26500 or ER34615, with communication once every 2 weeks
In theory, it can last for more than 10 years
● Supports chip SIM cards without the need for a SIM card holder, avoiding poor contact or oxidation that may affect SIM card reading and writing
● Supports CAOP mode, as well as UDP mode for China Mobile and China Unicom.
● Ultra low voltage operation: When the voltage of the lithium battery drops to 2.8V (the battery is usually dead at 2.6V), the module can still function
Working normally
● Independently developed, embedded 32-bit ARMV7 MCU with real-time operating system
The working frequency adopts 800/900MHz
The module works in UDP mode to save power and has a timed automatic wake-up function. The wake-up cycle can be customized by the user
The module supports switch quantity, transparent transmission mode, and photoelectric direct reading table types, 188 protocol, 645 protocol, pulse type table.
Embedded watchdog, wide power management, no crashes, automatic recovery from disconnections, flexible and convenient
● Anti interference design, even in the case of hardware deadlock, ordinary watchdogs cannot serve processors and communication modules
The function of reliably automatically restoring to normal state
● Standard Industrial TTL
● Support shell sensing to send data, convenient for debugging and parameter calibration.
● Provide user settings software and open interfaces
Industrial embedded design, easy installation, working temperature: -40 ° C~+85 ° C, communication is not affected at -35 ° C
Multiple baud rates can be set
The module can be triggered by a reed switch to start reporting data
The module reporting interval can be set to a maximum of 45 days and a minimum of 5 minutes
The JZX906B embedded NB-IOT low-power three meter module is based on cellular narrowband Internet of Things (Narrowband Internet of Things)
Of Things, NB IoT). The module is built on a cellular network. It is in the field of IoT
An emerging technology that supports low-power devices for cellular data connectivity in wide area networks, also known as low-power wide area networks
(LPWAN)。 NB IoT supports efficient connection of devices with long standby time and high network connectivity requirements. Can provide very
Comprehensive indoor cellular data connection coverage, with advantages such as low power consumption, wide coverage, low cost, and large capacity.
Product Features
Ultra low power consumption, with a current of less than 3uA during sleep mode; powered by batteries of ER26500 or ER34615, with communication once every 2 weeks
In theory, it can last for more than 10 years
● Supports chip SIM cards without the need for a SIM card holder, avoiding poor contact or oxidation that may affect SIM card reading and writing
● Supports CAOP mode, as well as UDP mode for China Mobile and China Unicom.
● Ultra low voltage operation: When the voltage of the lithium battery drops to 2.8V (the battery is usually dead at 2.6V), the module can still function
Working normally
● Independently developed, embedded 32-bit ARMV7 MCU with real-time operating system
The working frequency adopts 800/900MHz
The module works in UDP mode to save power and has a timed automatic wake-up function. The wake-up cycle can be customized by the user
The module supports switch quantity, transparent transmission mode, and photoelectric direct reading table types, 188 protocol, 645 protocol, pulse type table.
Embedded watchdog, wide power management, no crashes, automatic recovery from disconnections, flexible and convenient
● Anti interference design, even in the case of hardware deadlock, ordinary watchdogs cannot serve processors and communication modules
The function of reliably automatically restoring to normal state
● Standard Industrial TTL
● Support shell sensing to send data, convenient for debugging and parameter calibration.
● Provide user settings software and open interfaces
Industrial embedded design, easy installation, working temperature: -40 ° C~+85 ° C, communication is not affected at -35 ° C
Multiple baud rates can be set
The module can be triggered by a reed switch to start reporting data
The module reporting interval can be set to a maximum of 45 days and a minimum of 5 minutes
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-