Iron oxide red powder dispersion mixer

1. There are two types of iron oxide red: natural and artificial. It is pure iron oxide with superior light and high temperature resistance, as well as resistance to atmospheric influences, polluted gases, and all alkalis. Mainly used for coloring paints, rubber, plastics, buildings, etc.

2. Working principle of iron oxide red powder liquid mixer: XLC2000 is equipped with a specially designed rotor, with one inlet for liquid and the other for powder. The working principle is to use the high-speed rotation of a special rotor to generate a vacuum, and continuously and uniformly introduce the powder into the rapidly flowing liquid, which is instantly and uniformly dispersed and mixed through a shear chamber. Due to the fact that liquid and powder do not come into contact with each other before mixing, only at the moment before mixing, the powder is dispersed and introduced into the liquid flow, so the probability of agglomeration between powders is relatively low. The machine operates in a cyclic manner until all the powder is added, seals the powder inlet, and continues to disperse and mix in the mixing chamber. Depending on the characteristics of the product and the performance of the powder, the concentration can reach up to 70%.

3. Powder is prone to agglomeration, difficult to disperse, and dust flying is a common problem in existing powder processing techniques. Following traditional processes but unable to find better solutions has become a major challenge in the powder processing flow. Sid has developed the XLC2000 series of products specifically designed to address the increasing demand for online mixing and dispersion of powders and liquids. Due to the uniform dispersion of the powder from the beginning, there is no incomplete wetting of the powder, nor will there be any agglomeration of the liquid surface, stirring shaft, and tank wall. If the viscosity of the liquid is too high, it is recommended to add a pump at the liquid inlet to increase the circulation flow rate.

The SID online powder liquid mixer can quickly wet and disperse different types of powders and particles in the liquid without clumping.

4. Advantages of XLC2000:

1) Efficient inhalation system with high throughput

2) Simple and sturdy design

3) Automatically adjust the supply of solids and liquids

4) No need for additional batching equipment

5) Closed system to prevent dust and solvent emissions

6) Wetting particles to prevent the formation of clumps

7) Unpacking and unloading without losing raw materials

8) Greatly shorten production time

9) Reduce the addition of raw materials by more effectively crushing them

10) Compact production method

11) Developed an easy to upgrade process to use laboratory machine XLC for production machine XLC

12) The machine can automatically drain water and has CIP cleaning and SIP functions

13) All parts in contact with liquids are made of 316L or 316 Ti stainless steel

14) Fully automated

15) Compliant with 3A hygiene and certification

16) Provide pharmaceutical grade equipment as needed

The structure of the online powder liquid dispersion mixer: XLC2000 is equipped with a specially designed screw rotor, mixing head, and dispersion head,One inlet for liquid and the other for powder. The working principle is to use the high-speed rotation of a special screw rotor to generate feed, andThe powder is continuously and uniformly introduced into a rapidly flowing liquid, and is instantly and uniformly dispersed and mixed through a shear chamber. Due to the combination of liquid and powderBefore mixing, the bodies are not in contact with each other. Only at the moment before mixing, the powder is dispersed and introduced into the liquid flow, so the powder isThe probability of reunion is relatively low.

When production requires a continuous process, we recommend the XLC2000 series continuous powder liquid dispersion mixer to meet the requirements

requirement. In a dust-free environment, solid powder and liquid are instantly mixed and dispersed, and XLC effectively blends this mixtureDisperse and combine to form a homogeneous final product. The various substances mixed are pre mixed according to a certain ratio,Then disperse and directly obtain the finished product. You can save on tanks and other auxiliary equipment, which saves costs and operationsThe cost of production. XLC has a special design that does not require vacuum negative pressure to suck powder into the machine, thusAvoid air intrusion. During the production process, XLC has great flexibility and also allows for higher material density.

XLC2000 series powder liquid dispersion mixer parameter table

SID engineers and application experts can assist you in resolving issues related to installing machine PLDs into your existing process system or expanding the supply range of new production equipment.

Iron oxide red powder dispersion mixer