1、 Technical parameters:

1. Complies with the national standard GB/24689.2-2009 for plant protection machinery frequency vibration insecticidal lamps.

2. Contact insecticide net: connected with stainless steel square vertical net, with a vertical wire diameter of 2mm, grid voltage: ≤ 6KV ± 500V, equipped with grid overcurrent short circuit protection device to prevent grid short circuit caused by residual insect bodies.

3. Lure light source: frequency vibration lamp tube (365~680nm), with a service life of>50000 hours.

4. Impact area: ≥ 0.17 ㎡.

5. Lamp start-up time: ≤ 5s.

6. Lamp power: Lamp power: 15W.

7. Whole lamp power: ≤ 25W.

8. Solar panel components: monocrystalline silicon solar panels with a power of ≥ 40Wp. (Optional according to local light irradiation intensity)

9. Battery: DC12V/24Ah maintenance free gel battery (battery capacity can be selected according to actual needs)

10. Light control technology: Automatically turn on and off lights according to the alternation of day and night.

11. Rain control device: When the humidity is greater than 95% RH, the frequency vibration lamp can enter automatic protection mode. When the humidity is not greater than 95% RH, it can resume normal operation.

12. Time control module: Based on the behavioral patterns of target insects, 8 time control modes can be set.

*13. Reverse polarity protection: It has a positive and negative pole accidental reverse polarity protection function to prevent damage to the lamp body caused by improper human operation.

*14. Low temperature protection: When the air temperature is below about 5 degrees Celsius (with an error of ± 5%), the insecticidal lamp enters automatic sleep mode, which can increase the service life of the battery.

*15. Battery protection: The control circuit is designed with automatic maintenance function for the battery to prevent overcharging and overdischarging from reducing the service life of the battery.

*16. Control circuit: The circuit board is highly integrated and designed, using a microcontroller and program software to control the circuit. The integrated circuit board includes a microcontroller control module, a boost module, a ballast module, and a solar charging control module, with no internal wiring to reduce power loss. It can achieve one click self check and set working hours.

*17. Status display: The blue LED indicator light above the insecticidal lamp body displays the working status of the photovoltaic and battery charging, while the red LED indicator light displays the working status and fault status, making it convenient for users to understand the operation of the entire lamp.

*18. Wireless transmission module: Industrial grade design, using high-performance ultra-low power RF chips and high-speed microcontroller control, with ESD protection in the SIM card slot.

*19. Through the platform, working hours can be remotely set and lights can be turned on and off. Each device can be located through GPS, displaying the distributed locations on the map, making it convenient for users to view and equipped with anti-theft functions.

20. Lamp pole height: ≥ 3 meters (height can be customized according to actual needs).

21. Material of lamp post: hot-dip galvanizing process is adopted, and there are reinforcing ribs at the connection between the flange and the lamp post. (Material can be customized according to actual needs)

22. Control area: 40-60 acres.

23. Design lifespan: ≥ 5-15 years. (Excluding lamps and batteries)

2、 Software platform parameters

1. The device can display the distributed points on the map through GPS positioning, which is convenient for users to view and has anti-theft function.

2. Through the platform, it is possible to remotely set the working time of the lights and control the on/off of the lights.

2. You can view the on/off mode, timing duration, lamp status, light control, rain control, temperature control, tilting, signal strength and other working status information of the lamp, accurately understand the real-time working situation of the equipment, and make judgments, analyses and warnings for equipment failures.

4. It can display real-time air temperature, humidity, number of electric shocks, timing duration, charging voltage, current, latitude and longitude values, and reported time.

5. The air temperature and humidity data, as well as the hourly insecticide count, can be displayed in real-time in the form of charts and line graphs, making it convenient for users to analyze and warn of pest trends more accurately based on the occurrence of pests.