Introduction to the Verification Regulations for Constant Temperature and Humidity Test Chambers
Introduction to the Verification Regulations for Constant Temperature and Humidity Test ChambersTechnical Specifications | |
model |
DB-TH-S-80G. Z.D |
Inner box dimensions |
W×H×D :400×500×400(mm) |
outer box dimensions |
W×H×D :900×1450×1000(mm) |
temperature range |
G: -20℃— 100℃(150℃) Z: -40℃— 100℃(150℃) D: -70℃— 100℃(150℃) |
humidity range |
20% RH —98% RH |
Control stability |
Temperature ± 0.5 ℃, humidity ± 2.0% |
Uniformity of distribution |
Temperature ± 2.0 ℃ Humidity ± 3.0% |
heating rate |
3 ℃/min (approximately 25 minutes from -40 ℃ to 30 ℃) nonlinear no-load |
降温速率 |
1 ℃/min (reduced from 30 ℃ to -40 ℃ for about 70 minutes) Nonlinear no-load |
Temperature limit |
Zui high temperature 150 ℃ Zui low temperature -70 ℃ |
Freezing system | |
compressor |
*French "Taikang" brand fully enclosed compressor |
condenser |
Fin type attached platform dispersing hot air fan |
evaporator |
Fin type multi-stage automatic load capacity adjustment |
expansion valve |
Danfoss components from Denmark |
refrigerant |
Imported environmentally friendly refrigerant R404A from the United States |
Refrigeration auxiliary components |
Desiccant (Denmark), oil separator (USA), refrigerant window (Denmark), solenoid valve (Japan), filter (Japan), pressure controller (Korea), shut-off valve (Italy) and other refrigeration accessories are all imported constant temperature and humidity chambers |
product structure | |
Inner box material |
SUS # 304 stainless steel plate |
outer box material |
SUS # 304 stainless steel plate |
Insulation material |
Hard Polyurethane foam+glass wool |
packing |
Silicone foam tightening 1 strip |
shelf |
There are 2 height adjustable stainless steel shelves inside the box (material: SUS # 304 stainless steel) |
heater |
Stainless steel fin type heat sink U-shaped heating tube imported from Taiwan, China |
humidifier |
Design of Split Type Humidifier Cylinder |
Wind turbine |
1 motor/stainless steel extended shaft/multi wing fan blade aluminum alloy wind wheel (SIROCCO FAN)/special adjustable hundred page air supply circulation system |
Box door |
Single door, double-layer door, embedded non reactive flat handle/four layer vacuum tempered glass enlarged window/electric automatic defogging, imported "PHILIP" lighting tube |
Humidity system |
One 15L stainless steel water tank is hidden inside/One automatic water supply pump (automatically supplying water from the lower water tank to the upper water tank)/Water recovery device/Water shortage alarm device |
