
ZN1151/3351DP/GP typeDouble flange liquid level transmitterIt is a pressure sensor component used to prevent the medium in the pipeline from directly entering the transmitter. It is connected to the transmitter by a capillary tube filled with fluid. Used to measure the liquid level, flow rate, and pressure of liquids, gases, or vapors, and then convert them into 4-20mA DC signal output.
ZN1151/3351DP/GP typeAfter the differential pressure/pressure transmitter is equipped with a remote transmission sealing device, it becomes the ZN1151/3351DP/GP typeDouble flange liquid level transmitterIt still has various characteristics of SY1151/3351DP/GP differential pressure/pressure transmitters. Can communicate with the HART handheld device for setting and monitoring.
This measurement method can avoid direct contact between the measured medium and the isolation diaphragm of the transmitter. It is suitable for the following situations:
1. The tested medium has a corrosive effect on the sensitive components of the transmitter
2. Need to isolate the high-temperature measured medium from the transmitter
3. There are suspended solids or high viscosity media in the tested medium
4. The tested medium is easily solidified or crystallized when introduced by a pressure tube
5. Strictly purify the measuring head when replacing the measured medium
6. The measuring head must be kept hygienic and contamination is strictly prohibited. Object of use: Corrosive or viscous liquids
Attention: Remote transmitters should not be used in vacuum environments.
There are four types of remote transmission devices for SY1151/3351DP/GP double flange liquid level transmitters:
1. 1191PFW flat remote transmission device (standard 3 ", working pressure 2.5MPa)
2. 1191RTW type threaded installation remote transmission device (maximum working pressure 10MPa)
3. 1191RFW type flange mounted remote transmission device
4. 1191EFW type plug-in tube remote transmission device (standard 3 "or 4", working pressure 2.5MPa)
◆ Selection method
|
ZN1151/3351DP |
Remote transmissiondifferential pressure transmitter |
||||||
|
ZN1151/3351GP |
Remote transmissionpressure transmitter |
||||||
|
|
code |
Range of measurementKPa |
|||||
|
3 |
0-1.3~7.5 |
||||||
|
4 |
0-6.2~37.4 |
||||||
|
5 |
0-31.1~186.8 |
||||||
|
6 |
0-117~690 |
||||||
|
7 |
0-345~2068 |
||||||
|
8 |
0-117~690 |
||||||
|
|
code |
output |
|||||
|
E |
4-20mADC |
||||||
|
S |
intelligent |
||||||
|
|
code |
Flange Material |
Flange Material |
||||
|
22 |
316SST |
316SST |
|||||
|
|
code |
additional function |
|||||
|
S1 |
A remote transmission device |
|
|||||
|
S2 |
Two remote transmission devices |
|
|||||
|
|
code |
option |
|||||
|
M1 |
0-100%Linear indicator table |
||||||
|
M2 |
LED display table |
||||||
|
M3 |
LCDdisplay list |
||||||
|
B1 |
Pipe bending bracket |
||||||
|
B2 |
Board mounted bending bracket |
||||||
|
B3 |
Pipe mounted flat bracket |
||||||
|
d |
Explosion proof typedⅡBT4 |
||||||
|
i |
Intrinsically safe typeiaⅡCT6 |
||||||
Electromagnetic flowmeter K-type thermocouple thermal resistance bimetallic thermometer pressure transmitter flow transmitterFlange type liquid level transmitter
