The integrated water purification equipment for small water plants is a comprehensive water purifier device equipped with improved throat pipes, passing nets, folding plates, hydraulic reaction facilities, etc. It combines flocculation, clarification, and filtration processes compactly and reasonably, and can easily purify raw water from general surface water sourcesFormulate the incoming water quality that meets the requirements of the subsequent process.

Composition of integrated water purification equipment for small water plants:

The functions of each part are as follows:

Generally, water purification devices use vortex reactions to mix water and coagulants, but the effectiveness is limitedThe fruit is unstable due to changes in water volume. The water purification device is mixed with a mixer and its effectiveness is not affected by changes in water volume.

The filtration rate is 10m/h, and finally the clean water flows into the clean water tank for disinfection and drinking. The backwash cycle of the filter tank is 12About an hour, with a recoil time of 5-10 minutes.

Characteristics of integrated water purification equipment for small water plants:

1. Simple and practical: The integrated automatic backwash water purifier is designed with prominent features of convenience, practicality, and easy operation. The entire system cleverly utilizes hydraulic characteristics to achieve automatic operation, with low requirements for the quality of operators. The general public can operate it freely and canCharacteristics of automatic control equipment operation. When the surface of the filter layer is blocked to a certain extent, it will automatically backwash. The entire device has no operating components, and equipment failures are almost zero. It operates reliably and is easy to maintain.

2. Easy to install and use: The main equipment of the integrated automatic backwash water purifier is a steel structure, which is made into finished products in the factory, transported to the site for installation and commissioning, and can be put into use with a fast construction period. Items that are not convenient for transportation can be manufactured on-site.

3. Coagulation reaction function: The integrated automatic backwash water purifier is designed to fully consider the differences in water quality in different regions. While selecting the appropriate dosing point, it also adds coagulation reaction function, allowing the device to have sufficient coagulation reaction time. And more conservativeThe surface load of the ground design makes the equipment more capable of withstanding impact loads and more suitable for different water quality situations in the region. The filtration system adopts low resistance water distribution for deep slow filtration to ensure that the turbidity of the filtered water is ≤ 3 degrees.

4. Widely applicable and with strong processing capability: It is widely used for the purification treatment of surface water such as rivers, lakes, etc., with a turbidity of no more than 3000 milliliters/liter before supplying industrial water or as a pre-treatment for chemical water.