Zhengzhou Chuangyu Technology Co., Ltd
Home>Products>Infrared methane sensor, gas detector
Infrared methane sensor, gas detector
GJG100H infrared methane sensor, gas detector. This product adopts embedded microcontroller and non dispersive infrared detection technology, overcomi
Product details

GJG100HInfrared methane sensor, gas detector

It is a fixed intrinsic safety detection instrument specifically used to monitor the concentration of gas in gas pipelines. This instrument adopts "Non Dispersive Infrared" (NDIR) gas detection technology, digital temperature and pressure compensation, integrated dust water separation technology, etc., effectively overcoming the influence of various parameter changes such as target gas temperature, pressure, humidity, background gas in the pipeline, achieving accurate and continuous measurement of gas in the range of 0% CH4-100% CH4 and displaying it on site. At the same time, the gas concentration value is converted into standard electrical signals and transmitted to related equipment. The instrument is suitable for gas detection in applications such as coal mine gas drainage pipelines, gas drainage pump stations, gas station transmission pipelines, gas power plant transmission pipelines, urban gas pipelines, natural gas transmission pipelines, etc.

GJG100HInfrared methane sensor, gas detector

Main technical indicators:
Measurement range: 0-100.0% CH4
Resolution: 0.01 for CH4 below 10.0%, 0.1 for CH4 above 10.0%
Measurement accuracy:
Basic error of measurement range (% CH4)
0.00~1.00
1.00~100.0 ≤ ±0.07% CH4
≤ ± 7% of the true value
Note: The above technical indicators are the general technical requirements for the product. Based on on-site requirements (such as CDM projects), products with smaller measurement errors and meeting trade settlement requirements, as well as relevant certificates issued by * inspection agencies for each unit, can be provided (inspection fees will be charged separately)
Response time: ≤ 50s
Calibration cycle: 6 months
Medium pressure: 30kpa~200kpa (absolute pressure)
Working humidity: ≤ 99% RH (without condensation)
Working voltage: (9-24.5) VDC
Working current: ≤ 50 mA • 24VDC
Output signal: 200 Hz~1000Hz (linearly corresponding to 0.00~10. Hz) 0%CH4)
Or 1-5mA or 4-20mA
*Transmission distance: not less than 2 km
Sampling method: Side tube installation method
Service life: ≥ 5 years


Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!