IPX7/8 anti immersion test deviceMeet the standards:

GB4208,IEC60529。

Main parameters:

Device NameIPX7/X8 continuous diving test device

Model IPX7/8

Test device height mm: 1500 (1200) x2000

Test device diameter mm: ￠ 500, ￠ 1000

Pressure range kg: 0~5

Material of experimental device: The main structure is entirely made of stainless steel material

Pressure method: Air pressure

Pressure display mode: pointer type, accuracy level: 1.6 level (allowable error: ≤± 0.016)

Pressure: 3-5 atmospheres (equivalent to 30-50m water depth pressure)

Protection device: Multiple overpressure protection devices: electronic intake automatic pressure limiting, mechanical automatic pressure relief, manual pressure regulation, manual pressure relief

Opening method: There are two ways to open the cylinder cover: automatic opening and manual opening

Time controller: 1s~99h

Electromagnetic valve: 2 pieces

Water level display: transparent high-pressure resistant pipe displays the height of the water level

Meets standards: GB4208, IEC60529

Note: It can be made according to customer requirements. Attached is a sample bracket.

Purpose:

IPX7/8 anti immersion test deviceIt is mainly used to test the performance of products when used in an environment immersed in water. It is mainly suitable for outdoor lighting, diving lamps (flashlights), swimming pool lamps, car lamps, household appliances, electrical and communication products, and signal devices to conduct shell protection level testing (IP waterproof level test). It is a specialized equipment for detecting waterproof protection levels and is an ideal testing device for testing institutions, as well as other water testing methods with equivalent effectiveness. After testing, the performance of the product is evaluated to determine whether it meets the requirements, in order to provide design, improvement, evaluation, and factory inspection for the product.

Test method names: Short term immersion test (IPX7) and continuous diving test (IPX8).

Experimental conditions: The distance from the bottom of the sample to the water surface is less than 1m, and the distance from the sample part to the water surface is less than 0.15m.

Test time: 30 minutes.

Delivery Instructions

• Including packaging, transportation, installation, debugging, and operation training.
• The supplier is responsible for the freight and delivery to the doorstep;
• The supplier is responsible for introducing installation and debugging operations until the employee of the demander stands up to operate;
• The warranty period is one year, starting from the date of installation and acceptance. The supplier promises to provide spare parts for life, and after-sales service must be provided on-site for resolution,

The supplier shall arrive at the user's site within 24 hours