Equipment nameUV resistant climate test chamberHorizontal UV aging test chamberUV aging test chamber

Reference standards

This UV climate resistance test chamber is suitable for performance reliability testing of various industrial products. It is designed in accordance with GB/T14522-93 "National Standard of the People's Republic of China - Plastic, Coating, Rubber Materials for Mechanical Industry Products - Accelerated Test Method for Artificial Climate" GB/T16585-1996 "National Standard of the People's Republic of China - Test Method for Artificial Climate Aging of Vulcanized Rubber (Fluorescent UV Lamp)" and GB/T16422.3-1997 "Laboratory Light Source Exposure Test Method for Plastics" and other corresponding standard clauses;

Using a light source

Horizontal UV aging test chamberThe light source uses 4-8 ultraviolet fluorescent lamps with a rated power of 40W as the light source. UV fluorescent tubes are distributed inside the equipment, with UVA-340 and UVB-313 light sources for users to choose and configure;

The UV-A wavelength range is 315-400nm, and the luminescence spectrum energy of the lamp is mainly concentrated at the wavelength of 340 nm;

The UV-B wavelength range is 280-315nm, and the luminescence spectrum energy of the lamp is mainly concentrated at the wavelength of 313nm;

Due to the gradual decay of UV light energy output over time, in order to reduce the experimental impact caused by light energy decay, this test chamber replaces an old lamp with a new lamp every 1/4 of the fluorescent lamp life (lamp life: 1600H) among the eight lamps. The position of the new lamp is changed as shown in the figure below, so that the UV light source is always composed of new and old lamps, thus obtaining a constant output of light energy;

UV cycle

The first-order photochemical reaction is not sensitive to temperature changes. However, the speed of the subsequent secondary reaction is closely related to temperature changes. Generally speaking, as the temperature increases, the reaction rate will accelerate. Therefore, temperature control is crucial during UV exposure testing, and it is even more important to match the test temperature used for accelerated testing with the high temperatures encountered by the material in practical applications. The temperature setting of UV in the device can be any point from 50 ℃ to 80 ℃, depending on the level of illumination and indoor ambient temperature. The temperature regulation of the equipment is controlled by a controller with microcomputer calculation function to command a series of systems inside the equipment, such as air heaters, water heaters, etc.

Moisture cycle

As the temperature increases, the destructive power of moisture on materials will sharply increase. Therefore, temperature control is a basic requirement during wet exposure. Furthermore, to achieve an acceleration effect, it is necessary to maintain a high temperature environment during the wet exposure process. The temperature setting for the condensation process in the device can be any point from 40 ℃ to 60 ℃.

Technical indicators

• Studio size: 450 × 1170 × 500mm;
• Dimensions: 580 × 1280 × 1050mm;
• Temperature range: RT+10 ℃~70 ℃;
• Humidity range: 90-98% R · H;
• Temperature uniformity: ± 2 ℃;
• Temperature fluctuation: ± 0.5 ℃;
• Temperature control method: PID self-tuning temperature control method;
• Center distance between lamp tubes: 70mm;
• Parallel distance between sample and lamp surface: 50mm;
• Standard specimen size: 75 × 150mm or 75 × 300mm (special specifications need to be specified in the contract);
• Water depth requirement for the sink: 25mm, automatic control;
• Effective irradiation area: 700 × 1060mm;
• Ultraviolet wavelength: UV-A wavelength range is 315-400nm or UV-B wavelength range is 280-315nm;
• Test time: adjustable from 0 to 999H;
• Blackboard temperature: 40 ℃~65 ℃;
• UV light and condensation time can be alternately adjusted;

Box structure

• Box shell material: steel plate spray coating treatment;
• Inner liner material: SUS stainless steel plate;
• Box cover material: steel plate spray coating treatment;
• The door opening method adopts a double opening design
• Install a total of 8 UV-A or UV-B ultraviolet lamps in the studio;
• The heating method is the inner pot sink type heating, which heats up quickly and has a uniform temperature distribution;
• The box cover is a double-sided flip cover, which can be opened and closed easily and freely;
• The inner tank water level automatically replenishes to prevent the heating tube from burning out and being damaged;
• The sample holder is made of stainless steel or aluminum alloy;

• The bottom of the test chamber adopts high-quality fixed PU movable wheels;
• The drainage system uses vortex and U-shaped sedimentation devices for drainage;
• The surface of the sample is parallel to the plane of the ultraviolet lamp;
• The spray type equipment is equipped with automatic nozzles inside, and the water pressure can be adjusted;
• If the lamp is on, once the door of the box is opened, the machine will automatically cut off the power supply to the lamp and enter a balanced state for cooling to prevent harm to the human body;
• Over temperature protection inside the box. When the temperature inside the box is too high, the machine will automatically cut off the power and enter a balanced state for cooling.

Circuit control system

• Intelligent temperature control instrument with a control accuracy of ± 0.1 ℃ and thin film buttons;
• The temperature control adopts P.I.D+S.S.R, and the system coordinates control with the same channel, which can improve the stability and service life of control components and interfaces;
• Touch sensitive settings, digital and direct display;
• It has the function of automatic calculation of P. I. D, which can reduce the inconvenience caused by manual setting;
• Lighting and condensation can be controlled vertically or alternately in a cyclic manner;
• The vertical control time and alternating cycle control time for lighting and condensation can be set arbitrarily within one thousand hours;
• In operation or setting, if an error occurs, a warning signal will be provided;
• Schneider components;
• Philips rectifier and starter (ensuring that the UV light can be turned on every time the device is turned on);

Protection system

• Non fuse protection switch;
• Overtemperature;
• Low water level;
• Overload;
• electric leakage;
• Fully sheathed terminal block;
• Automatic shutdown and other protections;

Equipment usage conditions

• Environmental temperature: 5 ℃ to+32 ℃;
• Environmental humidity: ≤ 85%;
• Power requirement: AC220 (± 10%) V/50HZ;

Delivery Instructions

Home delivery (the supplier is responsible for the shipping cost);

The supplier is responsible for installation, debugging, and training of operators on behalf of the purchaser until the purchaser's employees are ready to operate;

Warranty for one year (from the date of installation and acceptance), lifetime provision of spare parts and 48 hour after-sales service.